[PATCH] arm64: dts: rockchip: enable built-in thermal monitoring on rk3588

Dragan Simic dsimic at manjaro.org
Sat Jan 6 14:54:39 PST 2024


Hello Alexey,

Please see my comments below.

On 2024-01-06 23:23, Alexey Charkov wrote:
> Include thermal zones information in device tree for rk3588 variants
> and enable the built-in thermal sensing ADC on RADXA Rock 5B
> 
> Signed-off-by: Alexey Charkov <alchark at gmail.com>
> ---
>  .../boot/dts/rockchip/rk3588-rock-5b.dts      |   4 +
>  arch/arm64/boot/dts/rockchip/rk3588s.dtsi     | 143 ++++++++++++++++++
>  2 files changed, 147 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> index a5a104131403..f9d540000de3 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> @@ -772,3 +772,7 @@ &usb_host1_ehci {
>  &usb_host1_ohci {
>  	status = "okay";
>  };
> +
> +&tsadc {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> index 8aa0499f9b03..8235991e3112 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> @@ -10,6 +10,7 @@
>  #include <dt-bindings/reset/rockchip,rk3588-cru.h>
>  #include <dt-bindings/phy/phy.h>
>  #include <dt-bindings/ata/ahci.h>
> +#include <dt-bindings/thermal/thermal.h>
> 
>  / {
>  	compatible = "rockchip,rk3588";
> @@ -2112,6 +2113,148 @@ tsadc: tsadc at fec00000 {
>  		status = "disabled";
>  	};
> 
> +	thermal_zones: thermal-zones {
> +		soc_thermal: soc-thermal {

It should be better to name it cpu_thermal instead.  In the end, that's 
what it is.

> +			polling-delay-passive = <20>; /* milliseconds */
> +			polling-delay = <1000>; /* milliseconds */
> +			sustainable-power = <2100>; /* milliwatts */

These three comments above are pretty much redundant.

> +
> +			thermal-sensors = <&tsadc 0>;

An empty line should be added here.

> +			trips {
> +				threshold: trip-point-0 {

It should be better to name it cpu_alert0 instead, because that's what 
other newer dtsi files already use.

> +					temperature = <75000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +				target: trip-point-1 {

It should be better to name it cpu_alert1 instead, because that's what 
other newer dtsi files already use.

> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +				soc_crit: soc-crit {

It should be better to name it cpu_crit instead, because that's what 
other newer dtsi files already use.

> +					/* millicelsius */
> +					temperature = <115000>;
> +					/* millicelsius */

These two comments above are pretty much redundant.  It also applies to 
all other similar comments below.

> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +			cooling-maps {
> +				map0 {
> +					trip = <&target>;

Shouldn't &threshold (i.e. &cpu_alert0) be referenced here instead?

> +					cooling-device = <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;

Shouldn't all big CPU cores be listed here instead?

> +					contribution = <1024>;
> +				};
> +				map1 {
> +					trip = <&target>;

Shouldn't &target (i.e. &cpu_alert1) be referenced here instead?

> +					cooling-device = <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;

Shouldn't all little and big CPU cores be listed here instead?

> +					contribution = <1024>;
> +				};
> +				map2 {
> +					trip = <&target>;
> +					cooling-device = <&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +					contribution = <1024>;
> +				};

Isn't this cooling map redundant?

> +			};
> +		};
> +
> +		bigcore0_thermal: bigcore0-thermal {
> +			polling-delay-passive = <20>; /* milliseconds */
> +			polling-delay = <1000>; /* milliseconds */
> +			thermal-sensors = <&tsadc 1>;
> +
> +			trips {
> +				big0_crit: big0-crit {
> +					/* millicelsius */
> +					temperature = <115000>;
> +					/* millicelsius */
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		bigcore1_thermal: bigcore1-thermal {
> +			polling-delay-passive = <20>; /* milliseconds */
> +			polling-delay = <1000>; /* milliseconds */
> +			thermal-sensors = <&tsadc 2>;
> +
> +			trips {
> +				big1_crit: big1-crit {
> +					/* millicelsius */
> +					temperature = <115000>;
> +					/* millicelsius */
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		little_core_thermal: littlecore-thermal {
> +			polling-delay-passive = <20>; /* milliseconds */
> +			polling-delay = <1000>; /* milliseconds */
> +			thermal-sensors = <&tsadc 3>;
> +
> +			trips {
> +				little_crit: little-crit {
> +					/* millicelsius */
> +					temperature = <115000>;
> +					/* millicelsius */
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		center_thermal: center-thermal {
> +			polling-delay-passive = <20>; /* milliseconds */
> +			polling-delay = <1000>; /* milliseconds */
> +			thermal-sensors = <&tsadc 4>;
> +
> +			trips {
> +				center_crit: center-crit {
> +					/* millicelsius */
> +					temperature = <115000>;
> +					/* millicelsius */
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		gpu_thermal: gpu-thermal {
> +			polling-delay-passive = <20>; /* milliseconds */
> +			polling-delay = <1000>; /* milliseconds */
> +			thermal-sensors = <&tsadc 5>;
> +
> +			trips {
> +				gpu_crit: gpu-crit {
> +					/* millicelsius */
> +					temperature = <115000>;
> +					/* millicelsius */
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		npu_thermal: npu-thermal {
> +			polling-delay-passive = <20>; /* milliseconds */
> +			polling-delay = <1000>; /* milliseconds */
> +			thermal-sensors = <&tsadc 6>;
> +
> +			trips {
> +				npu_crit: npu-crit {
> +					/* millicelsius */
> +					temperature = <115000>;
> +					/* millicelsius */
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
> +
>  	saradc: adc at fec10000 {
>  		compatible = "rockchip,rk3588-saradc";
>  		reg = <0x0 0xfec10000 0x0 0x10000>;



More information about the Linux-rockchip mailing list