[PATCH v3 4/4] arm64: dts: rockchip: Add devicetree for Pine64 PineTab2

Ondřej Jirman megi at xff.cz
Wed Jan 3 01:42:54 PST 2024


Hello Manuel,

a few more things I noticed:

On Tue, Jan 02, 2024 at 05:15:47PM +0100, Manuel Traut wrote:
> From: Alexander Warnecke <awarnecke002 at hotmail.com>
> 
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&flash_led_en_h>;
> +
> +		led-0 {
> +			gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
> +			color = <LED_COLOR_ID_WHITE>;
> +			function = LED_FUNCTION_FLASH;
> +		};

This LED is supplied by VCC5V_MIDU, so maybe this should be a regulator-led
supplied by gpio (FLASH_LED_EN_H) controlled regulator-fixed named f_led which
is in turn supplied by VCC5V_MIDU.

https://megous.com/dl/tmp/9bf0d85d78946b5e.png

> +	};
> +
> [...]
>
> +
> +	speaker_amp: speaker-amplifier {
> +		compatible = "simple-audio-amplifier";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&spk_ctl>;
> +		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
> +		sound-name-prefix = "Speaker Amplifier";
> +		VCC-supply = <&vcc_bat>;
> +	};
> +
> +	vcc_3v3: vcc-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_3v3";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc3v3_sys>;
> +	};
> +
> +	vcc3v3_minipcie: vcc3v3-minipcie {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pcie_pwren_h>;
> +		regulator-name = "vcc3v3_minipcie";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc_sys>;

This regulator is supplied by vcc_bat: https://megous.com/dl/tmp/4ec71a4a2aea9498.png

> +	};
> +
> +	vcc3v3_sd: vcc3v3-sd {
> +		compatible = "regulator-fixed";
> +		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&sdmmc_pwren_l>;
> +		regulator-name = "vcc3v3_sd";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc3v3_sys>;
> +	};
> +
> +	vcc5v0_usb_host0: vcc5v0-usb-host0 {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&usb_host_pwren1_h>;
> +		regulator-name = "vcc5v0_usb_host0";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc5v_midu>;
> +	};
> +
> +	vcc5v0_usb_host2: vcc5v0-usb-host2 {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&usb_host_pwren2_h>;
> +		regulator-name = "vcc5v0_usb_host2";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc5v_midu>;
> +	};
> +
> +	vcc_bat: vcc-bat {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_bat";
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
> +
> +	vcc_sys: vcc-sys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		vin-supply = <&vcc_bat>;
> +	};
> +
> +	vdd1v2_dvp: vdd1v2-dvp {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vdd1v2_dvp";
> +		regulator-min-microvolt = <1200000>;
> +		regulator-max-microvolt = <1200000>;
> +		vin-supply = <&vcc_3v3>;
> +		/*enable-supply = <&vcc2v8_dvp>;*/
> +	};

There's no vdd1v2_dvp in the schematic on the camera sensor connector, or elsewhere:

  https://megous.com/dl/tmp/fd95f003d8f3fbfb.png

So I guess, you can drop this, entirely. Maybe it's VDD1V5_DVP but I don't think
it needs to be described in DT, since it's pretty local to this camera sensor,
and nothing else uses it.

  https://megous.com/dl/tmp/7fc384e196c5428f.png

regards,
	o.



More information about the Linux-rockchip mailing list