Re: [PATCH 2/4] dt-bindings: media: Document bindings for HDMI RX Controller

Shreeya Patel shreeya.patel at collabora.com
Wed Feb 21 12:55:46 PST 2024


On Friday, February 16, 2024 15:31 IST, Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> wrote:

> On 16/02/2024 10:49, Shreeya Patel wrote:
> > Document bindings for the Synopsys DesignWare HDMI RX Controller.
> > 
> > Reviewed-by: Dmitry Osipenko <dmitry.osipenko at collabora.com>
> > Signed-off-by: Shreeya Patel <shreeya.patel at collabora.com>
> 
> A nit, subject: drop second/last, redundant "bindings for". The
> "dt-bindings" prefix is already stating that these are bindings.
> See also:
> https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18
> 
> > ---
> >  .../bindings/media/snps,dw-hdmi-rx.yaml       | 128 ++++++++++++++++++
> >  1 file changed, 128 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> > new file mode 100644
> > index 000000000000..a70d96b548ee
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> > @@ -0,0 +1,128 @@
> > +# SPDX-License-Identifier: (GPL-3.0 OR BSD-2-Clause)
> 
> Use license checkpatch tells you.
> 
> > +# Device Tree bindings for Synopsys DesignWare HDMI RX Controller
> > +
> > +---
> > +$id: http://devicetree.org/schemas/media/snps,dw-hdmi-rx.yaml#
> 
> Why this is a media, not display? Does RX means input? Lack of hardware
> description does not help?
> 

Yes, RX means input and this binding doc is for the HDMI INPUT controller.
I'll add some description in v2

> 
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Synopsys DesignWare HDMI RX Controller
> > +
> > +maintainers:
> > +  - Shreeya Patel <shreeya.patel at collabora.com>
> > +
> 
> description:
> 
> > +properties:
> > +  compatible:
> > +    items:
> > +      - const: rockchip,rk3588-hdmirx-ctrler
> > +      - const: snps,dw-hdmi-rx
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 3
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: cec
> > +      - const: hdmi
> > +      - const: dma
> > +
> > +  clocks:
> > +    maxItems: 7
> > +
> > +  clock-names:
> > +    items:
> > +      - const: aclk
> > +      - const: audio
> > +      - const: cr_para
> > +      - const: pclk
> > +      - const: ref
> > +      - const: hclk_s_hdmirx
> > +      - const: hclk_vo1
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    maxItems: 4
> > +
> > +  reset-names:
> > +    items:
> > +      - const: rst_a
> > +      - const: rst_p
> > +      - const: rst_ref
> > +      - const: rst_biu
> 
> Drop rest_ prefix
> 
> > +
> > +  pinctrl-names:
> > +    const: default
> 
> Drop
> 
> > +
> > +  memory-region:
> > +    maxItems: 1
> > +
> > +  hdmirx-5v-detection-gpios:
> > +    description: GPIO specifier for 5V detection.
> 
> Detection of what? Isn't this HPD?
> 
> > +    maxItems: 1
> > +
> > +  rockchip,grf:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description:
> > +      The phandle of the syscon node for the GRF register.
> 
> Instead describe what for. Basically 80% of your description is
> redundant and only "GRF register" brings some information.
> 
> 
> > +
> > +  rockchip,vo1_grf:
> 
> No underscores.
> 
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description:
> > +      The phandle of the syscon node for the VO1 GRF register.
> 
> Same problem.
> 
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - interrupt-names
> > +  - clocks
> > +  - clock-names
> > +  - power-domains
> > +  - resets
> > +  - pinctrl-0
> > +  - pinctrl-names
> 
> Why? Drop.
> 
> > +  - hdmirx-5v-detection-gpios
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/power/rk3588-power.h>
> > +    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
> > +    hdmirx_ctrler: hdmirx-controller at fdee0000 {
> 
> What is hdmirx-controller? Isn't this just hdmi@?
> 

Writing just hdmi would imply hdmi output I think so that name
will not be appropriate here.

> Node names should be generic. See also an explanation and list of
> examples (not exhaustive) in DT specification:
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> 

This documentation doesn't have any generic name for HDMI INPUT
but maybe we can use the name hdmi-receiver like some other existing
binding has it here :-
Documentation/devicetree/bindings/media/i2c/tda1997x.txt

Thanks,
Shreeya Patel
> 
> > +      compatible = "rockchip,rk3588-hdmirx-ctrler", "snps,dw-hdmi-rx";
> > +      reg = <0x0 0xfdee0000 0x0 0x6000>;
> > +      interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>,
> > +                   <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH 0>,
> > +                   <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
> 
> 
> 
> Best regards,
> Krzysztof
> 
> _______________________________________________
> Kernel mailing list -- kernel at mailman.collabora.com
> To unsubscribe send an email to kernel-leave at mailman.collabora.com
> This list is managed by https://mailman.collabora.com




More information about the Linux-rockchip mailing list