[PATCH v2 3/4] arm64: dts: rockchip: rename vcc5v0_usb30_host regulator for Cool Pi CM5 EVB

[Andy Yan]

According to the schematic, USB20 HOST0 and HOST1 each have their own
independent power supply, but these two regulators controlled by a
same GPIO, so give it a more appropriate name.

Fixes: 791c154c3982 ("arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB")
Signed-off-by: Andy Yan <andyshrk at 163.com>
---

Changes in v2:
- Add two lable for this regulator

 arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
index 1b5681fe0471..9c0f408ef339 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
@@ -84,7 +84,7 @@ vcc3v3_lcd: vcc3v3-lcd-regulator {
 		vin-supply = <&vcc3v3_sys>;
 	};
 
-	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+	vcc5v0_usb_host1: vcc5v0_usb_host2: vcc5v0-usb-host-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_host";
 		regulator-boot-on;
@@ -200,12 +200,12 @@ &u2phy3 {
 };
 
 &u2phy2_host {
-	phy-supply = <&vcc5v0_usb30_host>;
+	phy-supply = <&vcc5v0_usb_host1>;
 	status = "okay";
 };
 
 &u2phy3_host {
-	phy-supply = <&vcc5v0_usb30_host>;
+	phy-supply = <&vcc5v0_usb_host2>;
 	status = "okay";
 };
 
-- 
2.34.1