[PATCH v3 14/15] arm64: dts: rockchip: Enable eDP0 display on RK3588S EVB1 board

Damon Ding damon.ding at rock-chips.com
Wed Dec 25 01:34:17 PST 2024


Hi Dmitry,

On 2024/12/20 13:38, Dmitry Baryshkov wrote:
> On Fri, 20 Dec 2024 at 04:38, Damon Ding <damon.ding at rock-chips.com> wrote:
>>
>> Hi Dmitry,
>>
>> On 2024/12/20 8:20, Dmitry Baryshkov wrote:
>>> On Thu, Dec 19, 2024 at 04:06:03PM +0800, Damon Ding wrote:
>>>> Add the necessary DT changes to enable eDP0 on RK3588S EVB1 board:
>>>> - Add edp-panel node
>>>> - Set pinctrl of pwm12 for backlight
>>>> - Enable edp0/hdptxphy0/vp2
>>>>
>>>> Signed-off-by: Damon Ding <damon.ding at rock-chips.com>
>>>>
>>>> ---
>>>>
>>>> Changes in v2:
>>>> - Remove brightness-levels and default-brightness-level properties in
>>>>     backlight node.
>>>> - Add the detail DT changes to commit message.
>>>>
>>>> Changes in v3:
>>>> - Use aux-bus instead of platform bus for edp-panel.
>>>> ---
>>>>    .../boot/dts/rockchip/rk3588s-evb1-v10.dts    | 52 +++++++++++++++++++
>>>>    1 file changed, 52 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
>>>> index bc4077575beb..9547ab18e596 100644
>>>> --- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
>>>> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
>>>> @@ -9,6 +9,7 @@
>>>>    #include <dt-bindings/gpio/gpio.h>
>>>>    #include <dt-bindings/input/input.h>
>>>>    #include <dt-bindings/pinctrl/rockchip.h>
>>>> +#include <dt-bindings/soc/rockchip,vop2.h>
>>>>    #include <dt-bindings/usb/pd.h>
>>>>    #include "rk3588s.dtsi"
>>>>
>>>> @@ -238,6 +239,41 @@ &combphy2_psu {
>>>>       status = "okay";
>>>>    };
>>>>
>>>> +&edp0 {
>>>> +    force-hpd;
>>>> +    status = "okay";
>>>> +
>>>> +    aux-bus {
>>>> +            panel {
>>>> +                    compatible = "lg,lp079qx1-sp0v";
>>>
>>> Why do you need the particular compat string here? Can you use the
>>> generic "edp-panel" instead? What if the user swaps the panel?
>>>
>>
>> The eDP panels used in conjunction with the RK3588S EVB1 have broken
>> identification, which is one of the valid reasons for using a particular
>> compat string. So the generic_edp_panel_probe() can not return success
>> when using the "edp-panel".
> 
> Broken how? I don't see such info in the commit message.
> 

The log related to the broken identification may be like:

[    0.623793] panel-simple-dp-aux aux-fdec0000.edp: Unknown panel ETC 
0x0000, using conservative timings

The eDP panel used in RK3588S EVB1 is indeed the LP079QX1_SP0V model, it 
should be also reasonable to use the "lg,lp079qx1-sp0v".

And I will mention all of the above in the commit message for the next 
version.

>>
>>>> +                    backlight = <&backlight>;
>>>> +                    power-supply = <&vcc3v3_lcd_edp>;
>>>> +
>>>> +                    port {
>>>> +                            panel_in_edp: endpoint {
>>>> +                                    remote-endpoint = <&edp_out_panel>;
>>>> +                            };
>>>> +                    };
>>>> +            };
>>>> +    };
>>>> +};
>>>> +
>>>> +&edp0_in {
>>>> +    edp0_in_vp2: endpoint {
>>>> +            remote-endpoint = <&vp2_out_edp0>;
>>>> +    };
>>>> +};
>>>> +
>>>> +&edp0_out {
>>>> +    edp_out_panel: endpoint {
>>>> +            remote-endpoint = <&panel_in_edp>;
>>>> +    };
>>>> +};
>>>> +
>>>> +&hdptxphy0 {
>>>> +    status = "okay";
>>>> +};
>>>> +
>>>>    &i2c3 {
>>>>       status = "okay";
>>>>
>>>> @@ -399,6 +435,7 @@ usbc0_int: usbc0-int {
>>>>    };
>>>>
>>>>    &pwm12 {
>>>> +    pinctrl-0 = <&pwm12m1_pins>;
>>>>       status = "okay";
>>>>    };
>>>>
>>>> @@ -1168,3 +1205,18 @@ usbdp_phy0_dp_altmode_mux: endpoint at 1 {
>>>>               };
>>>>       };
>>>>    };
>>>> +
>>>> +&vop_mmu {
>>>> +    status = "okay";
>>>> +};
>>>> +
>>>> +&vop {
>>>> +    status = "okay";
>>>> +};
>>>> +
>>>> +&vp2 {
>>>> +    vp2_out_edp0: endpoint at ROCKCHIP_VOP2_EP_EDP0 {
>>>> +            reg = <ROCKCHIP_VOP2_EP_EDP0>;
>>>> +            remote-endpoint = <&edp0_in_vp2>;
>>>> +    };
>>>> +};
>>>> --
>>>> 2.34.1
>>>>

Best regards
Damon




More information about the Linux-rockchip mailing list