[PATCH v2 27/27] mtd: spinand: winbond: Add support for DTR operations

[Miquel Raynal]

W25N01JW and W25N02JW support many DTR read modes in single, dual and
quad configurations.

DTR modes however cannot be used at 166MHz, as the bus frequency in
this case must be lowered to 80MHz.

Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
 drivers/mtd/nand/spi/winbond.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index 51972ba0f193c7b27ece0296c1590ddfed0ac813..8394a1b1fb0c125ddb614269069d107463e905a3 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -24,10 +24,15 @@
  */
 
 static SPINAND_OP_VARIANTS(read_cache_dtr_variants,
+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_DTR_OP(0, 8, NULL, 0, 80 * HZ_PER_MHZ),
+		SPINAND_PAGE_READ_FROM_CACHE_X4_DTR_OP(0, 2, NULL, 0, 80 * HZ_PER_MHZ),
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_DTR_OP(0, 4, NULL, 0, 80 * HZ_PER_MHZ),
+		SPINAND_PAGE_READ_FROM_CACHE_X2_DTR_OP(0, 2, NULL, 0, 80 * HZ_PER_MHZ),
 		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_DTR_OP(0, 2, NULL, 0, 80 * HZ_PER_MHZ),
 		SPINAND_PAGE_READ_FROM_CACHE_FAST_OP(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_OP(0, 1, NULL, 0, 54 * HZ_PER_MHZ));
 

-- 
2.47.0