[PATCH v3 1/7] arm64: dts: rockchip: Add rk3576 naneng combphy nodes

[Kever Yang]

rk3576 has two naneng combo phys:
- combophy0 is used for one of pcie and sata;
- combophy1 is used for one of pcie, sata and usb3;

Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---

Changes in v3:
- Update the subject

Changes in v2:
- Update the clock and reset names to pass the DTB CHECK

 arch/arm64/boot/dts/rockchip/rk3576.dtsi | 36 ++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index 436232ffe4d1..a147879da501 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -1587,6 +1587,42 @@ uart11: serial at 2afd0000 {
 			status = "disabled";
 		};
 
+		combphy0_ps: phy at 2b050000 {
+			compatible = "rockchip,rk3576-naneng-combphy";
+			reg = <0x0 0x2b050000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&cru CLK_REF_PCIE0_PHY>,
+				 <&cru PCLK_PCIE2_COMBOPHY0>,
+				 <&cru PCLK_PCIE0>;
+			clock-names = "ref", "apb", "pipe";
+			assigned-clocks = <&cru CLK_REF_PCIE0_PHY>;
+			assigned-clock-rates = <100000000>;
+			resets = <&cru SRST_PCIE0_PIPE_PHY>,
+				 <&cru SRST_P_PCIE2_COMBOPHY0>;
+			reset-names = "phy", "apb";
+			rockchip,pipe-grf = <&php_grf>;
+			rockchip,pipe-phy-grf = <&pipe_phy0_grf>;
+			status = "disabled";
+		};
+
+		combphy1_psu: phy at 2b060000 {
+			compatible = "rockchip,rk3576-naneng-combphy";
+			reg = <0x0 0x2b060000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&cru CLK_REF_PCIE1_PHY>,
+				 <&cru PCLK_PCIE2_COMBOPHY1>,
+				 <&cru PCLK_PCIE1>;
+			clock-names = "ref", "apb", "pipe";
+			assigned-clocks = <&cru CLK_REF_PCIE1_PHY>;
+			assigned-clock-rates = <100000000>;
+			resets = <&cru SRST_PCIE1_PIPE_PHY>,
+				 <&cru SRST_P_PCIE2_COMBOPHY1>;
+			reset-names = "phy", "apb";
+			rockchip,pipe-grf = <&php_grf>;
+			rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
+			status = "disabled";
+		};
+
 		sram: sram at 3ff88000 {
 			compatible = "mmio-sram";
 			reg = <0x0 0x3ff88000 0x0 0x78000>;
-- 
2.25.1