[PATCH 2/2] arm64: dts: rockchip: MECSBC: Add FRAM MB85RS128TY

[Jonas Rebmann]

From: David Jander <david at protonic.nl>

The board features a Fujitsu MB85RS128TY FRAM chip connected to spi0 CS
0. Add support for the MB85RS128TY to the device tree.

Signed-off-by: David Jander <david at protonic.nl>
Signed-off-by: Jonas Rebmann <jre at pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts b/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts
index ca041b4d2d38a4e06cd0a54a806fed2ab723c94d..c70f6df537596a85528e4e0b499e59d71f05b4a3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts
@@ -240,6 +240,18 @@ rtc at 51 {
 	};
 };
 
+&spi0 {
+	/* use hardware chipselect on cs0 (cs1 unconnected) */
+	pinctrl-0 = <&spi0m0_pins>, <&spi0m0_cs0>;
+	status = "okay";
+
+	fram at 0 {
+		compatible = "fujitsu,mb85rs128ty";
+		reg = <0>;
+		spi-max-frequency = <33000000>;
+	};
+};
+
 &i2s1_8ch {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;

-- 
2.39.5