[PATCH v9 0/9] Drivers to support the MCU on QNAP NAS devices

[Lee Jones]

On Thu, 07 Nov 2024 12:47:03 +0100, Heiko Stuebner wrote:
> This implements a set of drivers for the MCU used on QNAP NAS devices.
> 
> Of course no documentation for the serial protocol is available, so
> thankfully QNAP has a tool on their rescue-inird to talk to the MCU and
> I found interceptty [0] to listen to what goes over the serial connection.
> 
> In general it looks like there are two different generations in general,
> an "EC" device and now this "MCU" - referenced in the strings of the
> userspace handlers for those devices.
> 
> [...]

Applied, thanks!

[1/9] HID: hid-sensor-hub: don't use stale platform-data on remove
      commit: e079a120f31e3f9c00180aa13c1df18cc138f7fe
[2/9] mfd: core: make platform_data pointer const in struct mfd_cell
      commit: 8f4009ad901c44f0428dbde654c4dd1fb29c863b
[3/9] dt-bindings: mfd: add binding for qnap,ts433-mcu devices
      commit: 8877bcff3e3b4f08a1fc0232dbfdaeda085cfdf3
[4/9] mfd: add base driver for qnap-mcu devices
      commit: 944ca826f69e4723853b3876875b03aeafe67b60
[5/9] leds: add driver for LEDs from qnap-mcu devices
      commit: fe6a21ee38f12e3e5f9adbd2f9a840be105b943f
[6/9] Input: add driver for the input part of qnap-mcu devices
      commit: 4b27e0da257371d3d141fae38fdbdc3c3a67bce6
[7/9] hwmon: add driver for the hwmon parts of qnap-mcu devices
      commit: 41755872a8a8ab8d1644459d9634c53b743fe2be
[8/9] arm64: dts: rockchip: hook up the MCU on the QNAP TS433
      (no commit info)
[9/9] arm64: dts: rockchip: set hdd led labels on qnap-ts433
      (no commit info)

--
Lee Jones [李琼斯]