[PATCH] PCI: dw-rockchip: Enumerate endpoints based on dll_link_up irq in the combined sys irq

[Niklas Cassel]

On Wed, Dec 11, 2024 at 11:01:04AM +0530, Manivannan Sadhasivam wrote:
> On Wed, Nov 27, 2024 at 03:50:42PM +0100, Niklas Cassel wrote:
> > Most boards using the pcie-dw-rockchip PCIe controller lack standard
> > hotplug support.
> > 
> > Thus, when an endpoint is attached to the SoC, users have to rescan the bus
> > manually to enumerate the device. This can be avoided by using the
> > 'dll_link_up' interrupt in the combined system interrupt 'sys'.
> > 
> > Once the 'dll_link_up' irq is received, the bus underneath the host bridge
> > is scanned to enumerate PCIe endpoint devices.
> > 
> > This commit implements the same functionality that was implemented in the
> > DWC based pcie-qcom driver in commit 4581403f6792 ("PCI: qcom: Enumerate
> > endpoints based on Link up event in 'global_irq' interrupt").
> > 
> > The Root Complex specific device tree binding for pcie-dw-rockchip already
> > has the 'sys' interrupt marked as required, so there is no need to update
> > the device tree binding. This also means that we can request the 'sys' IRQ
> > unconditionally.
> > 
> > Signed-off-by: Niklas Cassel <cassel at kernel.org>
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>

Thanks for the review!

Could this patch please be picked up?


Kind regards,
Niklas