[PATCH 5/6] arm64: dts: rockchip: correct rk3328-roc regulator map
Diederik de Haas
didi.debian at cknow.org
Tue Dec 10 06:08:29 PST 2024
On Tue Dec 10, 2024 at 2:04 PM CET, Peter Geis wrote:
> On Tue, Dec 10, 2024 at 6:31 AM Diederik de Haas <didi.debian at cknow.org> wrote:
> > On Tue Dec 10, 2024 at 2:30 AM CET, Peter Geis wrote:
> > > voltages to vcc_host1_5v, and standardize the order of regulator
> > > properties among the fixed regulators.
> >
> > Big fan of standardization :-) ...
> >
> > >
> > > Fixes: 2171f4fdac06 ("arm64: dts: rockchip: add roc-rk3328-cc board")
> > > Signed-off-by: Peter Geis <pgwipeout at gmail.com>
> > > ---
> > >
> > > arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi | 23 +++++++++++++-------
> > > 1 file changed, 15 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
> > > index f782c8220dd3..6984387ff8b3 100644
> > > --- a/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
> > > +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
> > > @@ -24,22 +24,23 @@ gmac_clkin: external-gmac-clock {
> > > #clock-cells = <0>;
> > > };
> > >
> > > - dc_12v: regulator-dc-12v {
> > > + /* fed from passive usb input connector */
> > > + dc_5v: regulator-dc-5v {
> > > compatible = "regulator-fixed";
> > > - regulator-name = "dc_12v";
> > > + regulator-name = "dc_5v";
> > > regulator-always-on;
> > > regulator-boot-on;
> > > - regulator-min-microvolt = <12000000>;
> > > - regulator-max-microvolt = <12000000>;
> > > + regulator-min-microvolt = <5000000>;
> > > + regulator-max-microvolt = <5000000>;
> > > };
> > >
> > > vcc_sd: regulator-sdmmc {
> > > compatible = "regulator-fixed";
> > > + regulator-name = "vcc_sd";
> > > gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
> > > pinctrl-names = "default";
> > > pinctrl-0 = <&sdmmc0m1_pin>;
> > > regulator-boot-on;
> > > - regulator-name = "vcc_sd";
> > > regulator-min-microvolt = <3300000>;
> > > regulator-max-microvolt = <3300000>;
> > > vin-supply = <&vcc_io>;
> >
> > ... but why not put regulator-name as the first of the regulator
> > properties as is done in the rk3328-rock64.dts ...
> >
> > > @@ -50,22 +51,25 @@ vcc_sdio: regulator-sdmmcio {
> > > states = <1800000 0x1>, <3300000 0x0>;
> > > regulator-name = "vcc_sdio";
> > > regulator-type = "voltage";
> > > + regulator-always-on;
> > > regulator-min-microvolt = <1800000>;
> > > regulator-max-microvolt = <3300000>;
> > > - regulator-always-on;
> > > vin-supply = <&vcc_sys>;
> > > };
> > >
> > > vcc_host1_5v: vcc_otg_5v: regulator-vcc-host1-5v {
> > > compatible = "regulator-fixed";
> > > + regulator-name = "vcc_host1_5v";
> > > enable-active-high;
> > > pinctrl-names = "default";
> > > pinctrl-0 = <&usb20_host_drv>;
> > > - regulator-name = "vcc_host1_5v";
> > > regulator-always-on;
> > > + regulator-min-microvolt = <5000000>;
> > > + regulator-max-microvolt = <5000000>;
> > > vin-supply = <&vcc_sys>;
> > > };
> >
> > ... and was the case here?
>
> That's fair, thank you. I like the alphabetical approach, I'll go that
> way when I split this out.
FWIW, I'm fine when regulator-name and regulator-type would be put on
the top of the regulator-* properties, also because that's currently
the case for the rk3328-rock64.dts.
And a strict alphabetical order would look weird anyway as then
-max-microvolt should be ordered above -min-microvolt.
Cheers,
Diederik
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20241210/dbfc7250/attachment.sig>
More information about the Linux-rockchip
mailing list