[PATCH 3/6] arm64: dts: rockchip: remove ethernet alias from rk3328-roc

[Dragan Simic]

Hello Peter,

On 2024-12-10 02:30, Peter Geis wrote:
> Remove the ethernet alias added back in during the rk3328-roc dtsi
> conversion.

I just checked again the dtsi parent conversion I performed in
the commit f3c6526d6fb2 ("arm64: dts: rockchip: Convert dts files
used as parents to dtsi files"), and both rk3328-roc-cc.dts and
rk3328-roc-pc.dts had the ethernet0 alias defined before the
conversion.  Thus, the alias wasn't added back by mistake during
the conversion, it was there before.

Moreover, I don't see why would we want to delete the ethernet0
alias(es) in the first place?  It's usual for Rockchip board dts
files to have ethernetX aliases defined, and both ROC-RK3328-CC
and ROC-RK3328-PC have their gmac2io DT nodes enabled, and the
boards have wired Ethernet ports, so they should also have the
ethernet0 alias(es) defined.

Am I missing something?

> Fixes: f3c6526d6fb2 ("arm64: dts: rockchip: Convert dts files used as
> parents to dtsi files")
> Signed-off-by: Peter Geis <pgwipeout at gmail.com>
> ---
> 
>  arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
> index b5bd5e7d5748..f782c8220dd3 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
> @@ -9,7 +9,6 @@
> 
>  / {
>  	aliases {
> -		ethernet0 = &gmac2io;
>  		mmc0 = &sdmmc;
>  		mmc1 = &emmc;
>  	};