[PATCH v3 0/3] drm/rockchip: Add driver for the new DSI2 controller

[Dmitry Yashin]

Hello Heiko,

On 03.12.24 21:54, Heiko Stuebner wrote:
> This series adds a bridge and glue driver for the DSI2 controller found
> in the rk3588 soc from Rockchip, that is based on a Synopsis IP block.
>
> As the manual states:
> The Display Serial Interface 2 (DSI-2) is part of a group of communication
> protocols defined by the MIPI Alliance. The MIPI DSI-2 Host Controller is
> a digital core that implements all protocol functions defined in the
> MIPI DSI-2 Specification.
>
>
> While the driver structure is very similar to the previous DSI controller,
> the programming model of the core is quite different, with a completely
> new register set.
>
> Another notable difference is that the phy interface is variable now too
> in its width and some other settings.

Thanks for the series. I was able to get output on my Radxa's Rock 5B
(dsi1) + Radxa's 10FHD Display setup. Works smoothly with multiple DE's,
rotation and display on/off.

Tested-by: Dmitry Yashin <dmt.yashin at gmail.com>

-- 
Thanks,
Dmitry