[PATCH v3 2/7] arm64: dts: rockchip: add NanoPC-T6 LTS

[Krzysztof Kozlowski]

On 21/08/2024 12:26, Marcin Juszkiewicz wrote:
> FriendlyELEC introduced a second version of NanoPC-T6 SBC.
> 
> The miniPCIe slot got removed and USB 2.0 configuration has changed.
> There are two external accessible ports and two ports on the internal
> header.
> 
> There is an on-board USB hub which provides:
> - one external connector (bottom one)
> - two internal ports on pin header
> - one port for m.2 E connector
> 
> The top USB 2.0 connector comes directly from the SoC.
> 
> Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz at linaro.org>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile              |  1 +
>  .../boot/dts/rockchip/rk3588-nanopc-t6-lts.dts     | 61 ++++++++++++++++++++++
>  2 files changed, 62 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index fda1b980eb4b..0f982c741243 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -128,6 +128,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6-lts.dts b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6-lts.dts
> new file mode 100644
> index 000000000000..e950e40632cf
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6-lts.dts
> @@ -0,0 +1,61 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> + * Copyright (c) 2023 Thomas McKahan
> + * Copyright (c) 2024 Linaro Ltd.
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include "rk3588-nanopc-t6.dts"

Do not include DTS files. Please rename board to DTSI (which is for
includes) and then include it in respective boards. Remember to generate
patches with proper -M/-B/-C so the rename will be properly recognize.

Best regards,
Krzysztof