[PATCH v3 0/7] FriendlyELEC NanoPC-T6 improvements

[Krzysztof Kozlowski]

On 21/08/2024 12:26, Marcin Juszkiewicz wrote:
> This series updates FriendlyELEC NanoPC-T6 situation. There is non-LTS
> (2301) version of a board and LTS (2310) version.
> 
> This series creates separate DTS for NanoPC-T6 LTS (on top of non-LTS
> one) and enables USB 2.0 ports on it.
> 
> Then set of changes for both versions are done:
> 
> - enable USB-C port (one orientation only)
> - enable Mali GPU
> - enable IR receiver (not tested)
> - enable SPI flash (present on LTS, optional on non-LTS)
> 
> Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz at linaro.org>
> 
> ---
> Changes in v3:
> - create separate NanoPC-T6 LTS devicetree as suggested
> - Link to v2: https://lore.kernel.org/r/20240821-friendlyelec-nanopc-t6-lts-v2-0-e0138bb10042@linaro.org
> 
> Changes in v2:
> - merged changes into NanoPC-T6 dts file
> - add SPI flash pinctl for SPI M1
> - enable SPI on NanoPC-T6 LTS
> - enable USB-C port (one orientation only)
> - enable Mali GPI
> - enable IR receiver (not tested)
> - Link to v1: https://lore.kernel.org/r/20240820-friendlyelec-nanopc-t6-lts-v1-1-da1273c3e08e@juszkiewicz.com.pl

Please slow down with your postings. You posted v2 with obvious issues,
so you had to post v3... One bigger patchset per 24h.

Best regards,
Krzysztof