[PATCH] arm64: dts: rockchip: use "pwm-leds" for multicolor PWM LEDs on Radxa E25

[Heiko Stübner]

Am Freitag, 16. August 2024, 13:04:02 CEST schrieb FUKAUMI Naoki:
> to make multicolor PWM LEDs behavior more consistent with vendor
> kernel[1], use "pwm-leds" for it on Radxa E25.

sorry, but that is definitly not a valid reason.

A devicetree does describe actual hardware and is not a space for
configuration choices. So that whole notion to "match a kernel"
is not correct.

Looking at
https://wiki.radxa.com/Rock3/CM/CM3I/E25/getting_started
the specification table clearly designates the board's LED as
"RGB LED" - so one LED and multicolor .


Heiko


> [1] https://github.com/radxa/kernel/blob/linux-5.10-gen-rkr4.1/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts#L100-L121
> 
> Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
> Signed-off-by: FUKAUMI Naoki <naoki at radxa.com>
> ---
>  .../boot/dts/rockchip/rk3568-radxa-e25.dts    | 36 ++++++++++---------
>  1 file changed, 20 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
> index 72ad74c38a2b..0b527f67bdbd 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
> @@ -12,26 +12,30 @@ aliases {
>  	};
>  
>  	pwm-leds {
> -		compatible = "pwm-leds-multicolor";
> +		compatible = "pwm-leds";
>  
> -		multi-led {
> -			color = <LED_COLOR_ID_RGB>;
> +		led-red {
> +			color = <LED_COLOR_ID_RED>;
> +			default-state = "on";
> +			function = LED_FUNCTION_STATUS;
>  			max-brightness = <255>;
> +			pwms = <&pwm1 0 1000000 0>;
> +		};
>  
> -			led-red {
> -				color = <LED_COLOR_ID_RED>;
> -				pwms = <&pwm1 0 1000000 0>;
> -			};
> -
> -			led-green {
> -				color = <LED_COLOR_ID_GREEN>;
> -				pwms = <&pwm2 0 1000000 0>;
> -			};
> +		led-green {
> +			color = <LED_COLOR_ID_GREEN>;
> +			default-state = "on";
> +			function = LED_FUNCTION_STATUS;
> +			max-brightness = <255>;
> +			pwms = <&pwm2 0 1000000 0>;
> +		};
>  
> -			led-blue {
> -				color = <LED_COLOR_ID_BLUE>;
> -				pwms = <&pwm12 0 1000000 0>;
> -			};
> +		led-blue {
> +			color = <LED_COLOR_ID_BLUE>;
> +			default-state = "on";
> +			function = LED_FUNCTION_STATUS;
> +			max-brightness = <255>;
> +			pwms = <&pwm12 0 1000000 0>;
>  		};
>  	};
>  
>