[PATCH v11 1/1] arm64: dts: rockchip: Add AP6275P wireless support to Khadas Edge 2

[Jacobe Zang]

Khadas Edge2 uses the PCI-e Ampak AP6275P 2T2R Wi-Fi 6 module. The
pcie at 0 node can be used as Bridge1, so the wifi at 0 node is used as a
device under the Bridge1.

Co-developed-by: Muhammed Efe Cetin <efectn at protonmail.com>
Signed-off-by: Muhammed Efe Cetin <efectn at protonmail.com>
Reviewed-by: Arend van Spriel <arend.vanspriel at broadcom.com>
Signed-off-by: Jacobe Zang <jacobe.zang at wesion.com>
---
 .../boot/dts/rockchip/rk3588s-khadas-edge2.dts   | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index dbddfc3bb4641..a3361ca25867d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -283,6 +283,22 @@ &pcie2x1l2 {
 	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc3v3_pcie_wl>;
 	status = "okay";
+
+	pcie at 0,0 {
+		reg = <0x400000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+		device_type = "pci";
+		bus-range = <0x40 0x4f>;
+
+		wifi: wifi at 0,0 {
+			compatible = "brcm,bcm4329-fmac", "pci14e4,449d";
+			reg = <0x410000 0 0 0 0>;
+			clocks = <&hym8563>;
+			clock-names = "lpo";
+		};
+	};
 };
 
 &pwm11 {
-- 
2.34.1