[PATCH v4 2/2] arm64: dts: rockchip: add support for Radxa ROCK Pi E v3.0
FUKAUMI Naoki
naoki at radxa.com
Wed Aug 14 02:57:27 PDT 2024
Radxa ROCK Pi E v3.0 is a compact networking SBC[1] using the Rockchip
RK3328 chip that ships in a number of RAM/eMMC/WiFi/BT configurations:
- Rockchip RK3328 SoC
- Quad A53 CPU
- 512MB/1GB/2GB DDR4 RAM
- 4/8/16/32GB eMMC
- Micro SD Card slot
- WiFi 4 and BT 4, or WiFi 5 and BT 5
- 1x 1000M Ethernet supporting PoE with add‑on PoE HAT
- 1x 100M Ethernet
- 1x USB 3.0 Type-A port (Host)
- 1x 4-ring 3.5mm headphone jack
- 40 Pin GPIO header
[1] https://radxa.com/products/rockpi/pie
Signed-off-by: FUKAUMI Naoki <naoki at radxa.com>
---
Changes in v4:
- update compatible string for OpenWrt
Changes in v3:
- fix conflict for recent change
Changes in v2:
- fix typo in commit message
- add missing --- in commit message
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3328-rock-pi-e-v3.dts | 15 +
.../boot/dts/rockchip/rk3328-rock-pi-e.dts | 460 +-----------------
...28-rock-pi-e.dts => rk3328-rock-pi-e.dtsi} | 5 -
4 files changed, 31 insertions(+), 450 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-v3.dts
rewrite arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts (97%)
copy arch/arm64/boot/dts/rockchip/{rk3328-rock-pi-e.dts => rk3328-rock-pi-e.dtsi} (98%)
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 4861987457a4..0e279afdc9ac 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -24,6 +24,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e-v3.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-pc.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-v3.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-v3.dts
new file mode 100644
index 000000000000..63ea4135d7cc
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-v3.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3328-rock-pi-e.dtsi"
+
+/ {
+ model = "Radxa ROCK Pi E v3.0";
+ compatible = "radxa,rock-pi-e-v3", "rockchip,rk3328";
+
+ aliases {
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
dissimilarity index 97%
index 3e08e2fd0a78..0929df3c803a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -1,445 +1,15 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * (C) Copyright 2020 Chen-Yu Tsai <wens at csie.org>
- *
- * Based on ./rk3328-rock64.dts, which is
- *
- * Copyright (c) 2017 PINE64
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-
-#include "rk3328.dtsi"
-
-/ {
- model = "Radxa ROCK Pi E";
- compatible = "radxa,rockpi-e", "rockchip,rk3328";
-
- aliases {
- ethernet0 = &gmac2io;
- ethernet1 = &gmac2phy;
- mmc0 = &sdmmc;
- mmc1 = &emmc;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 0>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1750000>;
-
- /* This button is unpopulated out of the factory. */
- button-recovery {
- label = "Recovery";
- linux,code = <KEY_VENDOR>;
- press-threshold-microvolt = <10000>;
- };
- };
-
- gmac_clkin: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "gmac_clkin";
- #clock-cells = <0>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pin>;
- pinctrl-names = "default";
-
- led-0 {
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- vcc_sd: sdmmc-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0m1_pin>;
- regulator-name = "vcc_sd";
- regulator-boot-on;
- vin-supply = <&vcc_io>;
- };
-
- vcc_host_5v: vcc-host-5v-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb30_host_drv>;
- enable-active-high;
- regulator-name = "vcc_host_5v";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- };
-
- vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- vcc_wifi: vcc-wifi-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_en>;
- regulator-name = "vcc_wifi";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_io>;
- };
-};
-
-&analog_sound {
- status = "okay";
-};
-
-&codec {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu1 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu2 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu3 {
- cpu-supply = <&vdd_arm>;
-};
-
-&emmc {
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
- vmmc-supply = <&vcc_io>;
- vqmmc-supply = <&vcc18_emmc>;
- status = "okay";
-};
-
-&gmac2io {
- assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
- assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
- clock_in_out = "input";
- phy-handle = <&rtl8211>;
- phy-mode = "rgmii";
- phy-supply = <&vcc_io>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmiim1_pins>;
- snps,aal;
- snps,rxpbl = <0x4>;
- snps,txpbl = <0x4>;
- tx_delay = <0x26>;
- rx_delay = <0x11>;
- status = "okay";
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- rtl8211: ethernet-phy at 1 {
- reg = <1>;
- pinctrl-0 = <ð_phy_int_pin>, <ð_phy_reset_pin>;
- pinctrl-names = "default";
- interrupt-parent = <&gpio1>;
- interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
- reset-assert-us = <10000>;
- reset-deassert-us = <50000>;
- reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gmac2phy {
- status = "okay";
-};
-
-&gpio0 {
- gpio-line-names =
- /* GPIO0_A0 - A7 */
- "", "", "", "", "", "", "", "",
- /* GPIO0_B0 - B7 */
- "", "", "", "", "", "", "", "",
- /* GPIO0_C0 - C7 */
- "", "", "", "", "", "", "", "",
- /* GPIO0_D0 - D7 */
- "", "", "", "pin-15 [GPIO0_D3]", "", "", "", "";
-};
-
-&gpio1 {
- gpio-line-names =
- /* GPIO1_A0 - A7 */
- "", "", "", "", "", "", "", "",
- /* GPIO1_B0 - B7 */
- "", "", "", "", "", "", "", "",
- /* GPIO1_C0 - C7 */
- "", "", "", "", "", "", "", "",
- /* GPIO1_D0 - D7 */
- "", "", "", "", "pin-07 [GPIO1_D4]", "", "", "";
-};
-
-&gpio2 {
- gpio-line-names =
- /* GPIO2_A0 - A7 */
- "pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]",
- "pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]",
- "pin-33 [GPIO2_A6]", "",
- /* GPIO2_B0 - B7 */
- "", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]",
- /* GPIO2_C0 - C7 */
- "pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]",
- "pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]",
- "pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]",
- /* GPIO2_D0 - D7 */
- "", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
- gpio-line-names =
- /* GPIO3_A0 - A7 */
- "pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]",
- "", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "",
- /* GPIO3_B0 - B7 */
- "pin-24 [GPIO3_B0]", "", "", "", "", "", "", "",
- /* GPIO3_C0 - C7 */
- "", "", "", "", "", "", "", "",
- /* GPIO3_D0 - D7 */
- "", "", "", "", "", "", "", "";
-};
-
-&i2c1 {
- status = "okay";
-
- rk805: pmic at 18 {
- compatible = "rockchip,rk805";
- reg = <0x18>;
- interrupt-parent = <&gpio0>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk805-clkout2";
- gpio-controller;
- #gpio-cells = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc5-supply = <&vcc_io>;
- vcc6-supply = <&vcc_sys>;
-
- regulators {
- vdd_log: DCDC_REG1 {
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1450000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vdd_arm: DCDC_REG2 {
- regulator-name = "vdd_arm";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1450000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <950000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_io: DCDC_REG4 {
- regulator-name = "vcc_io";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_18: LDO_REG1 {
- regulator-name = "vcc_18";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc18_emmc: LDO_REG2 {
- regulator-name = "vcc18_emmc";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vdd_10: LDO_REG3 {
- regulator-name = "vdd_10";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
- };
- };
-};
-
-&i2s1 {
- status = "okay";
-};
-
-&io_domains {
- pmuio-supply = <&vcc_io>;
- vccio1-supply = <&vcc_io>;
- vccio2-supply = <&vcc18_emmc>;
- vccio3-supply = <&vcc_io>;
- vccio4-supply = <&vcc_io>;
- vccio5-supply = <&vcc_io>;
- vccio6-supply = <&vcc_io>;
- status = "okay";
-};
-
-&pinctrl {
- ephy {
- eth_phy_int_pin: eth-phy-int-pin {
- rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- eth_phy_reset_pin: eth-phy-reset-pin {
- rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- leds {
- led_pin: led-pin {
- rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb3 {
- usb30_host_drv: usb30-host-drv {
- rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- wifi {
- wifi_en: wifi-en {
- rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-sd-highspeed;
- disable-wp;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
- vmmc-supply = <&vcc_sd>;
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcc_18>;
- status = "okay";
-};
-
-&tsadc {
- status = "okay";
-};
-
-&u2phy {
- status = "okay";
-};
-
-&u2phy_host {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usbdrd3 {
- dr_mode = "host";
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3328-rock-pi-e.dtsi"
+
+/ {
+ model = "Radxa ROCK Pi E";
+ compatible = "radxa,rockpi-e", "rockchip,rk3328";
+
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &emmc;
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dtsi
similarity index 98%
copy from arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
copy to arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dtsi
index 3e08e2fd0a78..bb01143dc91a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dtsi
@@ -17,14 +17,9 @@
#include "rk3328.dtsi"
/ {
- model = "Radxa ROCK Pi E";
- compatible = "radxa,rockpi-e", "rockchip,rk3328";
-
aliases {
ethernet0 = &gmac2io;
ethernet1 = &gmac2phy;
- mmc0 = &sdmmc;
- mmc1 = &emmc;
};
chosen {
--
2.43.0
More information about the Linux-rockchip
mailing list