[PATCH v9 4/5] wifi: brcmfmac: Add optional lpo clock enable support
jacobe.zang at wesion.com
jacobe.zang at wesion.com
Sat Aug 10 03:08:21 PDT 2024
On 2024/8/10 17:44, Sai Krishna Gajula <saikrishnag at marvell.com> wrote:
>
> > -----Original Message-----
> > From: Jacobe Zang <jacobe.zang at wesion.com>
> > Sent: Saturday, August 10, 2024 9:22 AM
> > To: robh at kernel.org; krzk+dt at kernel.org; heiko at sntech.de;
> > kvalo at kernel.org; davem at davemloft.net; edumazet at google.com;
> > kuba at kernel.org; pabeni at redhat.com; conor+dt at kernel.org;
> > arend.vanspriel at broadcom.com
> > Cc: efectn at protonmail.com; dsimic at manjaro.org; jagan at edgeble.ai;
> > devicetree at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linux-
> > rockchip at lists.infradead.org; linux-kernel at vger.kernel.org;
> > arend at broadcom.com; linux-wireless at vger.kernel.org;
> > netdev at vger.kernel.org; megi at xff.cz; duoming at zju.edu.cn;
> > bhelgaas at google.com; minipli at grsecurity.net; brcm80211 at lists.linux.dev;
> > brcm80211-dev-list.pdl at broadcom.com; nick at khadas.com; Jacobe Zang
> > <jacobe.zang at wesion.com>
> > Subject: [PATCH v9 4/5] wifi: brcmfmac: Add optional lpo clock
> > enable support
> >
> > WiFi modules often require 32kHz clock to function. Add support to enable
> > the clock to PCIe driver and move "brcm,bcm4329-fmac" check to the top of
> > brcmf_of_probe. Change function prototypes from void to int and add
> > appropriate errno's for return
> > WiFi modules often require 32kHz clock to function. Add support to enable
> > the clock to PCIe driver and move "brcm,bcm4329-fmac" check to the top of
> > brcmf_of_probe. Change function prototypes from void to int and add
> > appropriate errno's for return values that will be send to bus when error
> > occurred.
> >
> > Co-developed-by: Ondrej Jirman <megi at xff.cz>
> > Signed-off-by: Ondrej Jirman <megi at xff.cz>
> > Co-developed-by: Arend van Spriel <arend.vanspriel at broadcom.com>
> > Signed-off-by: Arend van Spriel <arend.vanspriel at broadcom.com>
> > Signed-off-by: Jacobe Zang <jacobe.zang at wesion.com>
> > ---
> > .../broadcom/brcm80211/brcmfmac/bcmsdh.c | 4 +-
> > .../broadcom/brcm80211/brcmfmac/common.c | 3 +-
> > .../wireless/broadcom/brcm80211/brcmfmac/of.c | 53 +++++++++++--------
> > .../wireless/broadcom/brcm80211/brcmfmac/of.h | 9 ++--
> > .../broadcom/brcm80211/brcmfmac/pcie.c | 3 ++
> > .../broadcom/brcm80211/brcmfmac/sdio.c | 24 ++++++---
> > .../broadcom/brcm80211/brcmfmac/usb.c | 3 ++
> > 7 files changed, 63 insertions(+), 36 deletions(-)
> >
> > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> > index 13391c2d82aae..b2ede4e579c5c 100644
> > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
> > @@ -947,8 +947,8 @@ int brcmf_sdiod_probe(struct brcmf_sdio_dev
> > *sdiodev)
> >
> > /* try to attach to the target device */
> > sdiodev->bus = brcmf_sdio_probe(sdiodev);
> > - if (!sdiodev->bus) {
> > - ret = -ENODEV;
> > + if (IS_ERR(sdiodev->bus)) {
> > + ret = PTR_ERR(sdiodev->bus);
> > goto out;
> > }
> > brcmf_sdiod_host_fixup(sdiodev->func2->card->host);
> > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
> > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
> > index b24faae35873d..58d50918dd177 100644
> > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
> > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
> > @@ -561,7 +561,8 @@ struct brcmf_mp_device
> > *brcmf_get_module_param(struct device *dev,
> > if (!found) {
> > /* No platform data for this device, try OF and DMI data */
> > brcmf_dmi_probe(settings, chip, chiprev);
> > - brcmf_of_probe(dev, bus_type, settings);
> > + if (brcmf_of_probe(dev, bus_type, settings) == -
> > EPROBE_DEFER)
> > + return ERR_PTR(-EPROBE_DEFER);
> > brcmf_acpi_probe(dev, bus_type, settings);
> > }
> > return settings;
> > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> > index e406e11481a62..f19dc7355e0e8 100644
> > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> > @@ -6,6 +6,7 @@
> > #include <linux/of.h>
> > #include <linux/of_irq.h>
> > #include <linux/of_net.h>
> > +#include <linux/clk.h>
> >
> > #include <defs.h>
> > #include "debug.h"
> > @@ -65,17 +66,21 @@ static int brcmf_of_get_country_codes(struct device
> > *dev,
> > return 0;
> > }
> >
> > -void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
> > - struct brcmf_mp_device *settings)
> > +int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
> > + struct brcmf_mp_device *settings)
> > {
> > struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio;
> > struct device_node *root, *np = dev->of_node;
> > + struct clk *clk;
> > const char *prop;
>
> Small nit, please check if reverse x-mas tree order need to be follow here.
>
> > int irq;
> > int err;
> > u32 irqf;
It can be seen from this line that there should be no need to follow the reverse x-mas tree order. Because it is a struct variable, so place with other struct ones.
> > u32 val;
> >
> > + if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
> > + return 0;
> > +
> > /* Apple ARM64 platforms have their own idea of board type, passed
> > in
> > * via the device tree. They also have an antenna SKU parameter
> > */
> > @@ -105,7 +110,7 @@ void brcmf_of_probe(struct device *dev, enum
> > brcmf_bus_type bus_type,
> > board_type = devm_kstrdup(dev, tmp, GFP_KERNEL);
> > if (!board_type) {
> > of_node_put(root);
> > - return;
> > + return 0;
> > }
> > strreplace(board_type, '/', '-');
> > settings->board_type = board_type;
> > @@ -113,33 +118,39 @@ void brcmf_of_probe(struct device *dev, enum
> > brcmf_bus_type bus_type,
> > of_node_put(root);
> > }
> >
> > - if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
> > - return;
> > -
> > err = brcmf_of_get_country_codes(dev, settings);
> > if (err)
> > brcmf_err("failed to get OF country code map (err=%d)\n",
> > err);
> >
> > of_get_mac_address(np, settings->mac);
> >
> > - if (bus_type != BRCMF_BUSTYPE_SDIO)
> > - return;
> > + if (bus_type == BRCMF_BUSTYPE_SDIO) {
> > + if (of_property_read_u32(np, "brcm,drive-strength", &val) ==
> > 0)
> > + sdio->drive_strength = val;
> >
> > - if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
> > - sdio->drive_strength = val;
> > + /* make sure there are interrupts defined in the node */
> > + if (!of_property_present(np, "interrupts"))
> > + return 0;
> >
> > - /* make sure there are interrupts defined in the node */
> > - if (!of_property_present(np, "interrupts"))
> > - return;
> > + irq = irq_of_parse_and_map(np, 0);
> > + if (!irq) {
> > + brcmf_err("interrupt could not be mapped\n");
> > + return 0;
> > + }
> > + irqf = irqd_get_trigger_type(irq_get_irq_data(irq));
> > +
> > + sdio->oob_irq_supported = true;
> > + sdio->oob_irq_nr = irq;
> > + sdio->oob_irq_flags = irqf;
> > + }
> >
> > - irq = irq_of_parse_and_map(np, 0);
> > - if (!irq) {
> > - brcmf_err("interrupt could not be mapped\n");
> > - return;
> > + clk = devm_clk_get_optional_enabled(dev, "lpo");
> > + if (!IS_ERR_OR_NULL(clk)) {
> > + brcmf_dbg(INFO, "enabling 32kHz clock\n");
> > + return clk_set_rate(clk, 32768);
> > + } else {
> > + return PTR_ERR_OR_ZERO(clk);
> > }
> > - irqf = irqd_get_trigger_type(irq_get_irq_data(irq));
> >
> > - sdio->oob_irq_supported = true;
> > - sdio->oob_irq_nr = irq;
> > - sdio->oob_irq_flags = irqf;
> > + return 0;
>
> ....
> ....
>
> > /* Detach and free everything */
> > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
> > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
> > index 9a105e6debe1f..f7db46ae44906 100644
> > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
> > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
> > @@ -1272,6 +1272,9 @@ static int brcmf_usb_probe_cb(struct
> > brcmf_usbdev_info *devinfo,
> > ret = -ENOMEM;
> > goto fail;
> > }
> > + ret = PTR_ERR_OR_ZERO(devinfo->settings);
> > + if (ret < 0)
> > + goto fail;
> >
> > if (!brcmf_usb_dlneeded(devinfo)) {
> > ret = brcmf_alloc(devinfo->dev, devinfo->settings);
> > --
> > 2.34.1
> >
> Reviewed-by: Sai Krishna <saikrishnag at marvell.com>
>
--
Best Regards
Jacobe
More information about the Linux-rockchip
mailing list