[PATCH 3/4] arm64: dts: rockchip: Add base DT for rk3528 SoC

[Diederik de Haas]

On Saturday, 3 August 2024 14:55:10 CEST Yao Zi wrote:
> +       gic: interrupt-controller at fed01000 {
> +               compatible = "arm,gic-400";
> +               #interrupt-cells = <3>;
> +               #address-cells = <0>;
> +               interrupt-controller;
> +               reg = <0x0 0xfed01000 0 0x1000>,
> +                     <0x0 0xfed02000 0 0x2000>,
> +                     <0x0 0xfed04000 0 0x2000>,
> +                     <0x0 0xfed06000 0 0x2000>;
> +               interrupts = <GIC_PPI 9
> +                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> +       };
> +
> +       uart0: serial at ff9f0000 {
> +               compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
> +               reg = <0x0 0xff9f0000 0x0 0x100>;
> +               interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> +               reg-shift = <2>;
> +               reg-io-width = <4>;
> +               clock-frequency = <24000000>;
> +               status = "disabled";
> +       };

The properties should be sorted as follows:
- compatible
- reg
- <other properties sorted alphabetically>
- status

This also applies to the other blocks which I didn't quote.

Cheers,
  Diederik
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20240804/d544266f/attachment.sig>