[PATCH v3] arm64: dts: rockchip: add PCIe3 support on rk3588-jaguar

Jonas Karlman jonas at kwiboo.se
Mon Apr 22 11:36:57 PDT 2024


Hi Heiko,

On 2024-04-22 15:35, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner at cherry.de>
> 
> The Jaguar SBC provides an M.2 slot connected to the pcie3 controller.
> In contrast to a number of other boards the pcie-refclk is gpio-controlled,
> so the necessary clock and is added to the list of pcie3 clocks.
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner at cherry.de>
> Reviewed-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>
> ---
> changes in v3:
> - drop unnecessary pinctrl comment (Quentin)
> - add Quentin's review
> 
> changes in v2:
> - "an" M.2 slot (Dragan)
> - pinctrl for refclk-en and reset pin (Quentin)
> - don't repurpose the pcie30x4_pins pinctrl entry for only wake (Quentin)
> 
>  .../arm64/boot/dts/rockchip/rk3588-jaguar.dts | 59 +++++++++++++++++++
>  1 file changed, 59 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
> index 4076c92668ba..0ad53d7768a3 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
> @@ -72,6 +72,27 @@ led-1 {
>  		};
>  	};
>  
> +	/*
> +	 * 100MHz reference clock for PCIe peripherals from PI6C557-05BLE
> +	 * clock generator.
> +	 * The clock output is gated via the OE pin on the clock generator.
> +	 * This is modeled as a fixed-clock plus a gpio-gate-clock.
> +	 */
> +	pcie_refclk_gen: pcie-refclk-gen-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <1000000000>;

This should probably be 100000000 (100 MHz) and not 1 GHz?

Regards,
Jonas

> +	};
> +
> +	pcie_refclk: pcie-refclk-clock {
> +		compatible = "gpio-gate-clock";
> +		clocks = <&pcie_refclk_gen>;
> +		#clock-cells = <0>;
> +		enable-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; /* PCIE30X4_CLKREQN_M0 */
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pcie30x4_clkreqn_m0>;
> +	};
> +
>  	pps {
>  		compatible = "pps-gpio";
>  		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> @@ -358,6 +379,30 @@ &pcie2x1l0 {
>  	status = "okay";
>  };
>  
> +&pcie30phy {
> +	status = "okay";
> +};
> +
> +&pcie3x4 {
> +	/*
> +	 * The board has a gpio-controlled "pcie_refclk" generator,
> +	 * so add it to the list of clocks.
> +	 */
> +	clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
> +		 <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
> +		 <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>,
> +		 <&pcie_refclk>;
> +	clock-names = "aclk_mst", "aclk_slv",
> +		      "aclk_dbi", "pclk",
> +		      "aux", "pipe",
> +		      "ref";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie30x4_waken_m0 &pcie30x4_perstn_m0>;
> +	reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTN_M0 */
> +	vpcie3v3-supply = <&vcc3v3_mdot2>;
> +	status = "okay";
> +};
> +
>  &pinctrl {
>  	emmc {
>  		emmc_reset: emmc-reset {
> @@ -376,6 +421,20 @@ led1_pin: led1-pin {
>  			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
>  		};
>  	};
> +
> +	pcie30x4 {
> +		pcie30x4_clkreqn_m0: pcie30x4-clkreqn-m0 {
> +			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie30x4_perstn_m0: pcie30x4-perstn-m0 {
> +			rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie30x4_waken_m0: pcie30x4-waken-m0 {
> +			rockchip,pins = <0 RK_PC7 12 &pcfg_pull_none>;
> +		};
> +	};
>  };
>  
>  &saradc {




More information about the Linux-rockchip mailing list