[PATCH 2/2] arm64: dts: rockchip: add dual-role usb3 hosts to rk3588 Tiger-Haikou

Quentin Schulz quentin.schulz at theobroma-systems.com
Mon Apr 22 02:06:55 PDT 2024


Hi Heiko,

On 4/18/24 23:03, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner at cherry.de>
> 
> Apart from the host-only usb3 controller (host2) the rk3588 also provides
> two dual-role controllers. On the Tiger-Haikou combination these are
> connected to the lower usb3-host port in host-only mode and the micro-usb3
> port for dual-role operation.
> 
> Add the necessary controllers, phys and usb-id extcon to the Tiger-Haikou
> board. The Q7 standard defines the pin as usb-id, but it will only ever
> get used if the baseboard actually provides an OTG port. So the extcon
> stays disabled in the dtsi and only gets enabled in the haikou dts.
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner at cherry.de>

Would have preferred two separate commits but the content is fine and 
it's not that difficult to review, so

Reviewed-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>

Thanks,
Quentin



More information about the Linux-rockchip mailing list