[PATCH] arm64: dts: rockchip: add PCIe3 support on rk3588-jaguar

Quentin Schulz quentin.schulz at theobroma-systems.com
Thu Apr 18 01:07:37 PDT 2024


Hi Heiko,

On 4/17/24 16:16, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner at cherry.de>
> 
> The Jaguar SBC provides a M.2 slot connected to the pcie3 controller.
> In contrast to a number of other boards the pcie-refclk is gpio-controlled,
> so the necessary clock is added to the list of pcie3 clocks.
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner at cherry.de>
> ---
>   .../arm64/boot/dts/rockchip/rk3588-jaguar.dts | 53 +++++++++++++++++++
>   1 file changed, 53 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
> index 5002105dc78e..908fbabd8b00 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
> @@ -72,6 +72,25 @@ led-1 {
>   		};
>   	};
>   
> +	/*
> +	 * 100MHz reference clock for PCIe peripherals from PI6C557-05BLE
> +	 * clock generator.
> +	 * The clock output is gated via the OE pin on the clock generator.
> +	 * This is modeled as a fixed-clock plus a gpio-gate-clock.
> +	 */
> +	pcie_refclk_gen: pcie-refclk-gen-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <1000000000>;
> +	};
> +
> +	pcie_refclk: pcie-refclk-clock {
> +		compatible = "gpio-gate-clock";
> +		clocks = <&pcie_refclk_gen>;
> +		#clock-cells = <0>;
> +		enable-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; /* PCIE30X4_CLKREQN_M0 */

I think we usually want to have the pinctrl for GPIOs as well to not 
assume the pins are muxed in that function by default or by the bootloader?

> +	};
> +
>   	pps {
>   		compatible = "pps-gpio";
>   		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> @@ -466,6 +485,40 @@ &pcie2x1l0 {
>   	status = "okay";
>   };
>   
> +&pcie30phy {
> +	status = "okay";
> +};
> +
> +&pcie30x4m0_pins {

I'm wondering if it really makes sense to reuse this node if we're 
planning to change the only property it has to mean something different?

> +	/*
> +	 * pcie30x4_clkreqn_m0 is used by the refclk generator
> +	 * pcie30x4_perstn_m0 is used as via the reset-gpio
> +	 */
> +	rockchip,pins =
> +		/* pcie30x4_waken_m0 */
> +		<0 RK_PC7 12 &pcfg_pull_none>;
> +};
> +
> +&pcie3x4 {
> +	/*
> +	 * The board has a gpio-controlled "pcie_refclk" generator,
> +	 * so add it to the list of clocks.
> +	 */
> +	clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
> +		 <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
> +		 <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>,
> +		 <&pcie_refclk>;
> +	clock-names = "aclk_mst", "aclk_slv",
> +		      "aclk_dbi", "pclk",
> +		      "aux", "pipe",
> +		      "ref";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie30x4m0_pins>;
> +	reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTN_M0 */

Ditto, I assume we want to have a pinmux for that GPIO as well?

Cheers,
Quentin



More information about the Linux-rockchip mailing list