[PATCH 13/18] i2c: rk3x: remove printout on handled timeouts

Dragan Simic dsimic at manjaro.org
Fri Apr 12 14:12:44 PDT 2024


Hello Wolfram,

On 2024-04-10 13:24, Wolfram Sang wrote:
> I2C and SMBus timeouts are not something the user needs to be informed
> about on controller level. The client driver may know if that really is
> a problem and give more detailed information to the user. The 
> controller
> should just pass this information upwards. Remove the printout.

Maybe it would be good to turn it into a debug message, instead of
simply removing it?  Maybe not all client drivers handle it correctly,
in which case having an easy way for debugging would be beneficial.

> Signed-off-by: Wolfram Sang <wsa+renesas at sang-engineering.com>
> ---
>  drivers/i2c/busses/i2c-rk3x.c | 3 ---
>  1 file changed, 3 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-rk3x.c 
> b/drivers/i2c/busses/i2c-rk3x.c
> index 086fdf262e7b..8c7367f289d3 100644
> --- a/drivers/i2c/busses/i2c-rk3x.c
> +++ b/drivers/i2c/busses/i2c-rk3x.c
> @@ -1106,9 +1106,6 @@ static int rk3x_i2c_xfer_common(struct 
> i2c_adapter *adap,
>  		spin_lock_irqsave(&i2c->lock, flags);
> 
>  		if (timeout == 0) {
> -			dev_err(i2c->dev, "timeout, ipd: 0x%02x, state: %d\n",
> -				i2c_readl(i2c, REG_IPD), i2c->state);
> -
>  			/* Force a STOP condition without interrupt */
>  			i2c_writel(i2c, 0, REG_IEN);
>  			val = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK;



More information about the Linux-rockchip mailing list