[PATCH v2 0/2] Add Protonic MECSBC board support

[Sascha Hauer]

This series adds support for the Protonic MECSBC. MECSBC is a single
board computer for blood analysis machines from RR-Mechatronics,
designed and manufactured by Protonic Holland, based on the Rockchip
RK3568 SoC.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
Changes in v2:
- use generic node names (Krzysztof)
- name regulators consistently (Krzysztof)
- do not use underscores in node names (Krzysztof)
- keep alphabetic order in arch/arm64/boot/dts/rockchip/Makefile (Heiko)
- use rgmii-id mode and drop [tr]x_delay (Andrew)
- add SD card regulator to support 1.8V modes
- Link to v1: https://lore.kernel.org/r/20240404-protonic-mecsbc-v1-0-ad5b42ade6c6@pengutronix.de

---
David Jander (1):
      arm64: dts: rockchip: add Protonic MECSBC device-tree

Sascha Hauer (1):
      dt-bindings: arm: rockchip: Add Protonic MECSBC board

 .../devicetree/bindings/arm/rockchip.yaml          |   5 +
 arch/arm64/boot/dts/rockchip/Makefile              |   1 +
 arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts     | 404 +++++++++++++++++++++
 3 files changed, 410 insertions(+)
---
base-commit: 39cd87c4eb2b893354f3b850f916353f2658ae6f
change-id: 20240404-protonic-mecsbc-6cfa56a48fb7

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>