[PATCH v8 16/26] PM / devfreq: rockchip-dfi: Add perf support
Sascha Hauer
s.hauer at pengutronix.de
Wed Oct 18 23:52:35 PDT 2023
Hi Chanwoo,
On Thu, Oct 19, 2023 at 12:11:14AM +0900, Chanwoo Choi wrote:
> Hi Sascha,
>
> Could you plesae fix the following kernel build report?
Just did that as a reply to the original patch. I moved
rockchip_ddr_perf_counters_add() inside the #ifdef CONFIG_PERF_EVENTS
Thanks for reviewing this series and for bringing it forward.
Sascha
>
> On 23. 10. 18. 16:58, kernel test robot wrote:
> > Hi Sascha,
> >
> > kernel test robot noticed the following build warnings:
> >
> > [auto build test WARNING on linus/master]
> > [also build test WARNING on v6.6-rc6]
> > [cannot apply to next-20231018]
> > [If your patch is applied to the wrong git tree, kindly drop us a note.
> > And when submitting patch, we suggest to use '--base' as documented in
> > https://git-scm.com/docs/git-format-patch#_base_tree_information]
> >
> > url: https://github.com/intel-lab-lkp/linux/commits/Sascha-Hauer/PM-devfreq-rockchip-dfi-Make-pmu-regmap-mandatory/20231018-142228
> > base: linus/master
> > patch link: https://lore.kernel.org/r/20231018061714.3553817-17-s.hauer%40pengutronix.de
> > patch subject: [PATCH v8 16/26] PM / devfreq: rockchip-dfi: Add perf support
> > config: m68k-allyesconfig (https://download.01.org/0day-ci/archive/20231018/202310181557.GIXGL21M-lkp@intel.com/config)
> > compiler: m68k-linux-gcc (GCC) 13.2.0
> > reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231018/202310181557.GIXGL21M-lkp@intel.com/reproduce)
> >
> > If you fix the issue in a separate patch/commit (i.e. not just a new version of
> > the same patch/commit), kindly add following tags
> > | Reported-by: kernel test robot <lkp at intel.com>
> > | Closes: https://lore.kernel.org/oe-kbuild-all/202310181557.GIXGL21M-lkp@intel.com/
> >
> > All warnings (new ones prefixed by >>):
> >
> >>> drivers/devfreq/event/rockchip-dfi.c:203:13: warning: 'rockchip_ddr_perf_counters_add' defined but not used [-Wunused-function]
> > 203 | static void rockchip_ddr_perf_counters_add(struct rockchip_dfi *dfi,
> > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > --
> >>> drivers/devfreq/event/rockchip-dfi.c:79: warning: Function parameter or member 'write_access' not described in 'dmc_count_channel'
> >
> >
> > vim +/rockchip_ddr_perf_counters_add +203 drivers/devfreq/event/rockchip-dfi.c
> >
> > 66
> > 67 /**
> > 68 * struct dmc_count_channel - structure to hold counter values from the DDR controller
> > 69 * @access: Number of read and write accesses
> > 70 * @clock_cycles: DDR clock cycles
> > 71 * @read_access: number of read accesses
> > 72 * @write_acccess: number of write accesses
> > 73 */
> > 74 struct dmc_count_channel {
> > 75 u64 access;
> > 76 u64 clock_cycles;
> > 77 u64 read_access;
> > 78 u64 write_access;
> > > 79 };
> > 80
> > 81 struct dmc_count {
> > 82 struct dmc_count_channel c[DMC_MAX_CHANNELS];
> > 83 };
> > 84
> > 85 /*
> > 86 * The dfi controller can monitor DDR load. It has an upper and lower threshold
> > 87 * for the operating points. Whenever the usage leaves these bounds an event is
> > 88 * generated to indicate the DDR frequency should be changed.
> > 89 */
> > 90 struct rockchip_dfi {
> > 91 struct devfreq_event_dev *edev;
> > 92 struct devfreq_event_desc desc;
> > 93 struct dmc_count last_event_count;
> > 94
> > 95 struct dmc_count last_perf_count;
> > 96 struct dmc_count total_count;
> > 97 seqlock_t count_seqlock; /* protects last_perf_count and total_count */
> > 98
> > 99 struct device *dev;
> > 100 void __iomem *regs;
> > 101 struct regmap *regmap_pmu;
> > 102 struct clk *clk;
> > 103 int usecount;
> > 104 struct mutex mutex;
> > 105 u32 ddr_type;
> > 106 unsigned int channel_mask;
> > 107 unsigned int max_channels;
> > 108 enum cpuhp_state cpuhp_state;
> > 109 struct hlist_node node;
> > 110 struct pmu pmu;
> > 111 struct hrtimer timer;
> > 112 unsigned int cpu;
> > 113 int active_events;
> > 114 int burst_len;
> > 115 int buswidth[DMC_MAX_CHANNELS];
> > 116 };
> > 117
> > 118 static int rockchip_dfi_enable(struct rockchip_dfi *dfi)
> > 119 {
> > 120 void __iomem *dfi_regs = dfi->regs;
> > 121 int ret = 0;
> > 122
> > 123 mutex_lock(&dfi->mutex);
> > 124
> > 125 dfi->usecount++;
> > 126 if (dfi->usecount > 1)
> > 127 goto out;
> > 128
> > 129 ret = clk_prepare_enable(dfi->clk);
> > 130 if (ret) {
> > 131 dev_err(&dfi->edev->dev, "failed to enable dfi clk: %d\n", ret);
> > 132 goto out;
> > 133 }
> > 134
> > 135 /* clear DDRMON_CTRL setting */
> > 136 writel_relaxed(HIWORD_UPDATE(0, DDRMON_CTRL_TIMER_CNT_EN | DDRMON_CTRL_SOFTWARE_EN |
> > 137 DDRMON_CTRL_HARDWARE_EN), dfi_regs + DDRMON_CTRL);
> > 138
> > 139 /* set ddr type to dfi */
> > 140 switch (dfi->ddr_type) {
> > 141 case ROCKCHIP_DDRTYPE_LPDDR2:
> > 142 case ROCKCHIP_DDRTYPE_LPDDR3:
> > 143 writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_LPDDR23, DDRMON_CTRL_DDR_TYPE_MASK),
> > 144 dfi_regs + DDRMON_CTRL);
> > 145 break;
> > 146 case ROCKCHIP_DDRTYPE_LPDDR4:
> > 147 case ROCKCHIP_DDRTYPE_LPDDR4X:
> > 148 writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_LPDDR4, DDRMON_CTRL_DDR_TYPE_MASK),
> > 149 dfi_regs + DDRMON_CTRL);
> > 150 break;
> > 151 default:
> > 152 break;
> > 153 }
> > 154
> > 155 /* enable count, use software mode */
> > 156 writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_SOFTWARE_EN, DDRMON_CTRL_SOFTWARE_EN),
> > 157 dfi_regs + DDRMON_CTRL);
> > 158 out:
> > 159 mutex_unlock(&dfi->mutex);
> > 160
> > 161 return ret;
> > 162 }
> > 163
> > 164 static void rockchip_dfi_disable(struct rockchip_dfi *dfi)
> > 165 {
> > 166 void __iomem *dfi_regs = dfi->regs;
> > 167
> > 168 mutex_lock(&dfi->mutex);
> > 169
> > 170 dfi->usecount--;
> > 171
> > 172 WARN_ON_ONCE(dfi->usecount < 0);
> > 173
> > 174 if (dfi->usecount > 0)
> > 175 goto out;
> > 176
> > 177 writel_relaxed(HIWORD_UPDATE(0, DDRMON_CTRL_SOFTWARE_EN),
> > 178 dfi_regs + DDRMON_CTRL);
> > 179 clk_disable_unprepare(dfi->clk);
> > 180 out:
> > 181 mutex_unlock(&dfi->mutex);
> > 182 }
> > 183
> > 184 static void rockchip_dfi_read_counters(struct rockchip_dfi *dfi, struct dmc_count *res)
> > 185 {
> > 186 u32 i;
> > 187 void __iomem *dfi_regs = dfi->regs;
> > 188
> > 189 for (i = 0; i < dfi->max_channels; i++) {
> > 190 if (!(dfi->channel_mask & BIT(i)))
> > 191 continue;
> > 192 res->c[i].read_access = readl_relaxed(dfi_regs +
> > 193 DDRMON_CH0_RD_NUM + i * 20);
> > 194 res->c[i].write_access = readl_relaxed(dfi_regs +
> > 195 DDRMON_CH0_WR_NUM + i * 20);
> > 196 res->c[i].access = readl_relaxed(dfi_regs +
> > 197 DDRMON_CH0_DFI_ACCESS_NUM + i * 20);
> > 198 res->c[i].clock_cycles = readl_relaxed(dfi_regs +
> > 199 DDRMON_CH0_COUNT_NUM + i * 20);
> > 200 }
> > 201 }
> > 202
> > > 203 static void rockchip_ddr_perf_counters_add(struct rockchip_dfi *dfi,
> > 204 const struct dmc_count *now,
> > 205 struct dmc_count *res)
> > 206 {
> > 207 const struct dmc_count *last = &dfi->last_perf_count;
> > 208 int i;
> > 209
> > 210 for (i = 0; i < dfi->max_channels; i++) {
> > 211 res->c[i].read_access = dfi->total_count.c[i].read_access +
> > 212 (u32)(now->c[i].read_access - last->c[i].read_access);
> > 213 res->c[i].write_access = dfi->total_count.c[i].write_access +
> > 214 (u32)(now->c[i].write_access - last->c[i].write_access);
> > 215 res->c[i].access = dfi->total_count.c[i].access +
> > 216 (u32)(now->c[i].access - last->c[i].access);
> > 217 res->c[i].clock_cycles = dfi->total_count.c[i].clock_cycles +
> > 218 (u32)(now->c[i].clock_cycles - last->c[i].clock_cycles);
> > 219 }
> > 220 }
> > 221
> >
>
> --
> Best Regards,
> Samsung Electronics
> Chanwoo Choi
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the Linux-rockchip
mailing list