[PATCH] arm64: dts: rockchip: Add dynamic-power-coefficient to rk3399 GPU

Lukasz Luba lukasz.luba at arm.com
Mon Nov 27 02:17:51 PST 2023



On 11/27/23 10:02, Chen-Yu Tsai wrote:
> On Mon, Nov 27, 2023 at 4:14 PM Lukasz Luba <lukasz.luba at arm.com> wrote:
>>
>> Add dynamic-power-coefficient to the GPU node. That will create Energy
>> Model for the GPU based on the coefficient and OPP table information.
>> It will enable mechanism such as DTMP or IPA to work with the GPU DVFS.
>> In similar way the Energy Model for CPUs in rk3399 is created, so both
>> are aligned in power scale. The maximum power used from this coefficient
>> is 1.5W at 600MHz.
>>
>> Signed-off-by: Lukasz Luba <lukasz.luba at arm.com>
>> ---
>>   arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> index 9da0b6d77c8d..87cfdf570b19 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> @@ -2113,6 +2113,7 @@ gpu: gpu at ff9a0000 {
>>                  interrupt-names = "job", "mmu", "gpu";
>>                  clocks = <&cru ACLK_GPU>;
>>                  #cooling-cells = <2>;
>> +               dynamic-power-coefficient = <2640>;
> 
> For reference, in the ChromeOS downstrean v5.10 kernel we have:
> 
> gpu_power_model: power_model {
>          compatible = "arm,mali-simple-power-model";
>          static-coefficient = <411522>;
>          dynamic-coefficient = <977>;
>          ts = <32000 4700 (-80) 2>;
>          thermal-zone = "gpu";
> };
> 
> This is for the Mali kbase.

That's downstream driver for downstream IPA thermal governor, which is
different. As you can see there, there is a split of the total power
to 'static power' and 'dynamic power' and thus those 2 coefficients:
'static-coefficient' and 'dynamic-coefficient'. There is also
polynomial for the exponential curve approximating temperature impact
to the increasing leakage (static power).

This is totally not upstream code and quite complex to derive thus
fly upstream. Therefore, in upstream we have very simple power
model right now, but it will be possible to update it at runtime
when the leakage is increased. I hope the new v5 version that
I'm going to send, will get into mainline soon [1].

Regards,
Lukasz

[1] 
https://lore.kernel.org/lkml/20230925081139.1305766-1-lukasz.luba@arm.com/



More information about the Linux-rockchip mailing list