[PATCH 3/8] i2c: rk3x: Adjust grf offset for i2c2 on rv1126
Heiko Stuebner
heiko at sntech.de
Thu Nov 16 11:54:02 PST 2023
Hi,
Am Montag, 13. November 2023, 13:07:00 CET schrieb Tim Lunn:
> Rockchip RV1126 has a special case grf offset/mask for i2c2
This sounds misleading. When looking at the soc-data, the grf offset
seems to be the same for all busses of the rv1126, only the offset
seems to be different for i2c2.
Sadly I don't have (and didn't find any) rv1126 TRM, so couldn't verify.
Change itself looks nice. As it's only this one bus of one soc so far,
we likely won't need a more involved solution just now.
> Signed-off-by: Tim Lunn <tim at feathertop.org>
> ---
>
> drivers/i2c/busses/i2c-rk3x.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
> index a044ca0c35a1..83b7bf7b48a7 100644
> --- a/drivers/i2c/busses/i2c-rk3x.c
> +++ b/drivers/i2c/busses/i2c-rk3x.c
> @@ -1288,8 +1288,12 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
> return -EINVAL;
> }
>
> - /* 27+i: write mask, 11+i: value */
> - value = BIT(27 + bus_nr) | BIT(11 + bus_nr);
> + if (i2c->soc_data == &rv1126_soc_data && bus_nr == 2)
> + /* rv1126 i2c2 set pmugrf offset-0x118, bit-4 */
same here, comment could drop the offset reference I guess.
> + value = BIT(20) | BIT(4);
> + else
> + /* 27+i: write mask, 11+i: value */
> + value = BIT(27 + bus_nr) | BIT(11 + bus_nr);
>
> ret = regmap_write(grf, i2c->soc_data->grf_offset, value);
> if (ret != 0) {
>
Heiko
More information about the Linux-rockchip
mailing list