[PATCH V3 6/6] dt-bindings: arm: rockchip: Add Powkiddy RK2023

[Chris Morgan]

From: Chris Morgan <macromorgan at hotmail.com>

Add support for the Powkiddy RK2023. The Powkiddy RK2023 is a handheld
gaming device with a 3.5 inch screen powered by the Rockchip RK3566
SoC. The device looks physically different from the Powkiddy RGB30,
but is functionally identical except for the panel.

Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |  1 +
 .../dts/rockchip/rk3566-powkiddy-rk2023.dts   | 38 +++++++++++++++++++
 2 files changed, 39 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index a18f33bf0c0e..f969618da352 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
new file mode 100644
index 000000000000..ba32d0793dca
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-powkiddy-rk2023.dtsi"
+
+/ {
+	model = "RK2023";
+	compatible = "powkiddy,rk2023", "rockchip,rk3566";
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			  <200000000>, <115200000>;
+};
+
+&dsi0 {
+	panel: panel at 0 {
+		compatible = "powkiddy,rk2023-panel", "newvision,nv3051d";
+		reg = <0>;
+		backlight = <&backlight>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc3v3_lcd0_n>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
-- 
2.34.1