[PATCH v4 16/21] PM / devfreq: rockchip-dfi: make register stride SoC specific

[Sascha Hauer]

The currently supported RK3399 has a stride of 20 between the channel
specific registers. Upcoming RK3588 has a different stride, so put
the stride into driver data to make it configurable.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 drivers/devfreq/event/rockchip-dfi.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/devfreq/event/rockchip-dfi.c b/drivers/devfreq/event/rockchip-dfi.c
index 400b1b360e3c9..3d76e58c602b2 100644
--- a/drivers/devfreq/event/rockchip-dfi.c
+++ b/drivers/devfreq/event/rockchip-dfi.c
@@ -100,6 +100,7 @@ struct rockchip_dfi {
 	int active_events;
 	int burst_len;
 	int buswidth[DMC_MAX_CHANNELS];
+	int ddrmon_stride;
 };
 
 static int rockchip_dfi_enable(struct rockchip_dfi *dfi)
@@ -176,13 +177,13 @@ static void rockchip_dfi_read_counters(struct rockchip_dfi *dfi, struct dmc_coun
 		if (!(dfi->channel_mask & BIT(i)))
 			continue;
 		count->c[i].read_access = readl_relaxed(dfi_regs +
-				DDRMON_CH0_RD_NUM + i * 20);
+				DDRMON_CH0_RD_NUM + i * dfi->ddrmon_stride);
 		count->c[i].write_access = readl_relaxed(dfi_regs +
-				DDRMON_CH0_WR_NUM + i * 20);
+				DDRMON_CH0_WR_NUM + i * dfi->ddrmon_stride);
 		count->c[i].access = readl_relaxed(dfi_regs +
-				DDRMON_CH0_DFI_ACCESS_NUM + i * 20);
+				DDRMON_CH0_DFI_ACCESS_NUM + i * dfi->ddrmon_stride);
 		count->c[i].total = readl_relaxed(dfi_regs +
-				DDRMON_CH0_COUNT_NUM + i * 20);
+				DDRMON_CH0_COUNT_NUM + i * dfi->ddrmon_stride);
 	}
 }
 
@@ -567,6 +568,8 @@ static int rk3399_dfi_init(struct rockchip_dfi *dfi)
 	dfi->buswidth[0] = FIELD_GET(RK3399_PMUGRF_OS_REG2_BW_CH0, val) == 0 ? 4 : 2;
 	dfi->buswidth[1] = FIELD_GET(RK3399_PMUGRF_OS_REG2_BW_CH1, val) == 0 ? 4 : 2;
 
+	dfi->ddrmon_stride = 0x14;
+
 	return 0;
 };
 
-- 
2.39.2