[PATCH v2] arm64: dts: rk3399-pinephone-pro: Add internal display support

[Javier Martinez Canillas]

Jarrah <kernel at undef.tools> writes:

> Hi Javier,
>
> On 3/27/23 18:41, Javier Martinez Canillas wrote:
>> From: Ondrej Jirman <megi at xff.cz>
>>
>> The phone's display is using a Hannstar LCD panel. Support it by adding a
>> panel DT node and all needed nodes (backlight, MIPI DSI, regulators, etc).
>>
>> Signed-off-by: Ondrej Jirman <megi at xff.cz>
>> Co-developed-by: Martijn Braam <martijn at brixit.nl>
>> Co-developed-by: Kamil Trzciński <ayufan at ayufan.eu>
>> Signed-off-by: Javier Martinez Canillas <javierm at redhat.com>
>> ---
>>
>> Changes in v2:
>> - Drop touchscreen node because used the wrong compatible (Ondrej Jirman).
>
>
> Any reason not to include this with the correct compatible string? It's 
> been available since 
> https://lore.kernel.org/all/20220813043821.9981-1-kernel@undef.tools/. 
> Swapping out gt917s for gt1158 in the node from your previous patch 
> should be enough.
>

Yes, but I didn't know that the driver already had the compatible string
so I just dropped it for now and was meaning to take a look to that later.

Adding the touchscreen node can be done as a follow-up though in another
patch.

-- 
Best regards,

Javier Martinez Canillas
Core Platforms
Red Hat