[PATCH 2/3] arm64: dts: rockchip: use just "port" in panel on Pinebook Pro

[Krzysztof Kozlowski]

The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:

  rk3399-pinebook-pro.dtb: edp-panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 .../boot/dts/rockchip/rk3399-pinebook-pro.dts    | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index 54bb0398128f..ddd45de97950 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -50,19 +50,9 @@ edp_panel: edp-panel {
 		pinctrl-0 = <&panel_en_pin>;
 		power-supply = <&vcc3v3_panel>;
 
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port at 0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				panel_in_edp: endpoint at 0 {
-					reg = <0>;
-					remote-endpoint = <&edp_out_panel>;
-				};
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
 			};
 		};
 	};
-- 
2.34.1