[PATCH] mmc: sdhci-of-dwcmshc: properly determine max clock on Rockchip

Vasily Khoruzhick anarsoul at gmail.com
Thu Mar 9 17:03:49 PST 2023


Currently .get_max_clock returns the current clock rate for cclk_emmc
on rk35xx, thus max clock gets set to whatever bootloader set it to.

In case of u-boot, it is intentionally reset to 50 MHz if it boots
from eMMC, see mmc_deinit() in u-boot sources. As a result, HS200 and
HS400 modes are never selected by Linux, because dwcmshc_rk35xx_postinit
clears appropriate caps if host->mmc->f_max is < 52MHz

cclk_emmc is not a fixed clock on rk35xx, so using
sdhci_pltfm_clk_get_max_clock is not appropriate here.

Implement rk35xx_get_max_clock that returns actual max clock for cclk_emmc.

Signed-off-by: Vasily Khoruzhick <anarsoul at gmail.com>
---
 drivers/mmc/host/sdhci-of-dwcmshc.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index d1490469184b..e68cd87998c8 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -126,6 +126,13 @@ static unsigned int dwcmshc_get_max_clock(struct sdhci_host *host)
 		return pltfm_host->clock;
 }
 
+static unsigned int rk35xx_get_max_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	return clk_round_rate(pltfm_host->clk, ULONG_MAX);
+}
+
 static void dwcmshc_check_auto_cmd23(struct mmc_host *mmc,
 				     struct mmc_request *mrq)
 {
@@ -343,7 +350,7 @@ static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = {
 	.set_clock		= dwcmshc_rk3568_set_clock,
 	.set_bus_width		= sdhci_set_bus_width,
 	.set_uhs_signaling	= dwcmshc_set_uhs_signaling,
-	.get_max_clock		= sdhci_pltfm_clk_get_max_clock,
+	.get_max_clock		= rk35xx_get_max_clock,
 	.reset			= rk35xx_sdhci_reset,
 	.adma_write_desc	= dwcmshc_adma_write_desc,
 };
-- 
2.39.2




More information about the Linux-rockchip mailing list