[PATCH v5 21/25] iommu: Require a default_domain for all iommu drivers
Baolu Lu
baolu.lu at linux.intel.com
Wed Jul 26 02:50:21 PDT 2023
On 2023/7/25 1:22, Jason Gunthorpe wrote:
> At this point every iommu driver will cause a default_domain to be
> selected, so we can finally remove this gap from the core code.
>
> The following table explains what each driver supports and what the
> resulting default_domain will be:
>
> ops->defaut_domain
> IDENTITY DMA PLATFORM v ARM32 dma-iommu ARCH
> amd/iommu.c Y Y N/A either
> apple-dart.c Y Y N/A either
> arm-smmu.c Y Y IDENTITY either
> qcom_iommu.c G Y IDENTITY either
> arm-smmu-v3.c Y Y N/A either
> exynos-iommu.c G Y IDENTITY either
> fsl_pamu_domain.c Y N/A N/A PLATFORM
> intel/iommu.c Y Y N/A either
> ipmmu-vmsa.c G Y IDENTITY either
> msm_iommu.c G IDENTITY N/A
> mtk_iommu.c G Y IDENTITY either
> mtk_iommu_v1.c G IDENTITY N/A
> omap-iommu.c G IDENTITY N/A
> rockchip-iommu.c G Y IDENTITY either
> s390-iommu.c Y Y N/A N/A PLATFORM
> sprd-iommu.c Y N/A DMA
> sun50i-iommu.c G Y IDENTITY either
> tegra-smmu.c G Y IDENTITY IDENTITY
> virtio-iommu.c Y Y N/A either
> spapr Y Y N/A N/A PLATFORM
> * G means ops->identity_domain is used
> * N/A means the driver will not compile in this configuration
>
> ARM32 drivers select an IDENTITY default domain through either the
> ops->identity_domain or directly requesting an IDENTIY domain through
> alloc_domain().
>
> In ARM64 mode tegra-smmu will still block the use of dma-iommu.c and
> forces an IDENTITY domain.
>
> S390 uses a PLATFORM domain to represent when the dma_ops are set to the
> s390 iommu code.
>
> fsl_pamu uses an IDENTITY domain.
>
> POWER SPAPR uses PLATFORM and blocking to enable its weird VFIO mode.
>
> The x86 drivers continue unchanged.
>
> After this patch group->default_domain is only NULL for a short period
> during bus iommu probing while all the groups are constituted. Otherwise
> it is always !NULL.
>
> This completes changing the iommu subsystem driver contract to a system
> where the current iommu_domain always represents some form of translation
> and the driver is continuously asserting a definable translation mode.
>
> It resolves the confusion that the original ops->detach_dev() caused
> around what translation, exactly, is the IOMMU performing after
> detach. There were at least three different answers to that question in
> the tree, they are all now clearly named with domain types.
>
> Tested-by: Heiko Stuebner<heiko at sntech.de>
> Tested-by: Niklas Schnelle<schnelle at linux.ibm.com>
> Tested-by: Steven Price<steven.price at arm.com>
> Tested-by: Marek Szyprowski<m.szyprowski at samsung.com>
> Tested-by: Nicolin Chen<nicolinc at nvidia.com>
> Signed-off-by: Jason Gunthorpe<jgg at nvidia.com>
> ---
> drivers/iommu/iommu.c | 21 +++++++--------------
> 1 file changed, 7 insertions(+), 14 deletions(-)
Reviewed-by: Lu Baolu <baolu.lu at linux.intel.com>
More information about the Linux-rockchip
mailing list