[PATCH] arm64: dts: rockchip: fix probe of analog sound card on rock-3a

Michael Riesch michael.riesch at wolfvision.net
Mon Jan 16 00:41:50 PST 2023


Hi Jonas,

On 1/15/23 22:15, Jonas Karlman wrote:
> The following was observed on my Radxa ROCK 3 Model A board:
> 
>   rockchip-pinctrl pinctrl: pin gpio1-9 already requested by vcc-cam-regulator; cannot claim for fe410000.i2s
>   ...
>   platform rk809-sound: deferred probe pending
> 
> Fix this by supplying a board specific pinctrl with the i2s1 pins used
> by pmic codec according to the schematic [1].
> 
> [1] https://dl.radxa.com/rock3/docs/hw/3a/ROCK-3A-V1.3-SCH.pdf
> 
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>

Makes sense to me, but...

> ---
>  arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> index 00d873a03cfe..a149c8b83f94 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> @@ -573,6 +573,8 @@ &i2s0_8ch {
>  };
>  
>  &i2s1_8ch {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;

... shouldn't this include i2s1m0_mclk as well?

For some reason this has been omitted in the pinctrl defined in
rk356x.dtsi. But then rk356x.dtsi also claims
 - both i2s1m0_sdo1 and i2s1m0_sdi3
 - both i2s1m0_sdo2 and i2s1m0_sdi2
 - both i2s1m0_sdo3 and i2s1m0_sdi1
which are mapped to the same respective pins. Therefore it seems that
there might be something wrong with this pinctrl altogether.

Cc: Nicolas Frattaroli, maybe he can provide some clarification.

Best regards,
Michael

>  	rockchip,trcm-sync-tx-only;
>  	status = "okay";
>  };



More information about the Linux-rockchip mailing list