[PATCH v2 01/12] media: v4l2: Add NV15 pixel format

Hsia-Jun Li Randy.Li at synaptics.com
Thu Feb 16 18:40:53 PST 2023



On 2/17/23 01:00, Nicolas Dufresne wrote:
> CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe.
> 
> 
> Le jeudi 16 février 2023 à 16:57 +0800, Hsia-Jun Li a écrit :
>>
>> On 1/12/23 20:56, Sebastian Fricke wrote:
>>> CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe.
>>>
>>>
>>> From: Jonas Karlman <jonas at kwiboo.se>
>>>
>>> Add the NV15 pixel format used by the Rockchip Video Decoder for 10-bit buffers.
>>>
>> I think this pixel format in the Rockchip platform supports multiple
>> planes buffers. It is all right not to add more variant until the ext
>> pixel format and buffer APIs are merged.
>>
>> I just want to mention the need of this.
> 
> Can you extend, I don't see that support in rkvdec driver (nor in mpp).
> 
>          /* config output base address */
>          dst_addr = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
>          writel_relaxed(dst_addr, rkvdec->regs + RKVDEC_REG_DECOUT_BASE);
> 
>          reg = RKVDEC_Y_VIRSTRIDE(y_virstride / 16);
>          writel_relaxed(reg, rkvdec->regs + RKVDEC_REG_Y_VIRSTRIDE);
> 
>          reg = RKVDEC_YUV_VIRSTRIDE(yuv_virstride / 16);
>          writel_relaxed(reg, rkvdec->regs + RKVDEC_REG_YUV_VIRSTRIDE);
> 
> That looks like a base address and 2 strides only. For NV15M (multiple
I think the rockchip drm does
VOP_WIN_SET(vop, win, uv_vir, DIV_ROUND_UP(fb->pitches[1], 4));
VOP_WIN_SET(vop, win, uv_mst, dma_addr);

vop2_win_write(win, VOP2_WIN_UV_VIR, DIV_ROUND_UP(fb->pitches[1], 4));
vop2_win_write(win, VOP2_WIN_UV_MST, uv_mst);

> allocation) you'd need 2 addresses. It could be that RGA or newer chip have that
> support, but as you know, we add formats only when actually using them.
 From the public info, it is not just rockchip but also NXP and xilinx 
support this 10bits format. I am not sure whether they would support that.

Besides, I think the rockchip decoder needs some spare space between its 
Y plane and UV plane. It would be hard to present such thing with the 
single plane format unless you want to get the wrong start address of 
the chroma plane.
> 
> regards,
> Nicolas
> 
>>> NV15 is a packed 10-bit 4:2:0 Y/CbCr format similar to P010 and P210 but has no
>>> padding between components. Instead, luminance and chrominance samples are grouped
>>> into 4s so that each group is packed into an integer number of bytes:
>>>
>>> YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
>>>
>>> The '15' suffix refers to the optimum effective bits per pixel
>>> which is achieved when the total number of luminance samples is a multiple
>>> of 8 for NV15.
>>>
>>> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
>>> Signed-off-by: Sebastian Fricke <sebastian.fricke at collabora.com>
>>> ---
>>>    .../userspace-api/media/v4l/pixfmt-yuv-planar.rst  | 75 ++++++++++++++++++++++
>>>    drivers/media/v4l2-core/v4l2-common.c              |  2 +
>>>    drivers/media/v4l2-core/v4l2-ioctl.c               |  1 +
>>>    include/uapi/linux/videodev2.h                     |  1 +
>>>    4 files changed, 79 insertions(+)
>>>
>>> diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
>>> index f1d5bb7b806d..7d8d228f8063 100644
>>> --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
>>> +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
>>> @@ -79,6 +79,13 @@ All components are stored with the same number of bits per component.
>>>          - Cr, Cb
>>>          - Yes
>>>          - Linear
>>> +    * - V4L2_PIX_FMT_NV15
>>> +      - 'NV15'
>>> +      - 15
>>> +      - 4:2:0
>>> +      - Cb, Cr
>>> +      - Yes
>>> +      - Linear
>>>        * - V4L2_PIX_FMT_NV12M
>>>          - 'NM12'
>>>          - 8
>>> @@ -183,6 +190,7 @@ horizontally.
>>>
>>>    .. _V4L2-PIX-FMT-NV12:
>>>    .. _V4L2-PIX-FMT-NV21:
>>> +.. _V4L2-PIX-FMT-NV15:
>>>    .. _V4L2-PIX-FMT-NV12M:
>>>    .. _V4L2-PIX-FMT-NV21M:
>>>    .. _V4L2-PIX-FMT-P010:
>>> @@ -586,6 +594,73 @@ Data in the 10 high bits, zeros in the 6 low bits, arranged in little endian ord
>>>          - Cb\ :sub:`11`
>>>          - Cr\ :sub:`11`
>>>
>>> +.. _V4L2_PIX_FMT_NV15:
>>> +
>>> +NV15
>>> +----
>>> +
>>> +Similar to P010, a semi-planar 10-bit Y/CbCr format, but all components are
>>> +packed without any padding between each other. As a side-effect, each group of
>>> +4 components are stored over 5 bytes (YYYY or UVUV = 4 * 10 bits = 40 bits = 5
>>> +bytes).
>>> +
>>> +.. flat-table:: Sample 4x4 NV15 Image
>>> +    :header-rows:  0
>>> +    :stub-columns: 0
>>> +
>>> +    * - start + 0:
>>> +      - Y'\ :sub:`00`
>>> +      - Y'\ :sub:`01`
>>> +      - Y'\ :sub:`02`
>>> +      - Y'\ :sub:`03`
>>> +    * - start + 8:
>>> +      - Y'\ :sub:`04`
>>> +      - Y'\ :sub:`10`
>>> +      - Y'\ :sub:`11`
>>> +      - Y'\ :sub:`12`
>>> +    * - start + 16:
>>> +      - Y'\ :sub:`13`
>>> +      - Y'\ :sub:`14`
>>> +      - Y'\ :sub:`20`
>>> +      - Y'\ :sub:`21`
>>> +    * - start + 24:
>>> +      - Y'\ :sub:`22`
>>> +      - Y'\ :sub:`23`
>>> +      - Y'\ :sub:`24`
>>> +      - Y'\ :sub:`30`
>>> +    * - start + 32:
>>> +      - Y'\ :sub:`31`
>>> +      - Y'\ :sub:`32`
>>> +      - Y'\ :sub:`33`
>>> +      - Y'\ :sub:`34`
>>> +
>>> +    * - start + 0:
>>> +      - Cb\ :sub:`00`
>>> +      - Cr\ :sub:`00`
>>> +      - Cb\ :sub:`01`
>>> +      - Cr\ :sub:`01`
>>> +    * - start + 8:
>>> +      - Cb\ :sub:`02`
>>> +      - Cr\ :sub:`02`
>>> +      - Cb\ :sub:`03`
>>> +      - Cr\ :sub:`03`
>>> +    * - start + 16:
>>> +      - Cb\ :sub:`04`
>>> +      - Cr\ :sub:`04`
>>> +      - Cb\ :sub:`10`
>>> +      - Cr\ :sub:`10`
>>> +    * - start + 24:
>>> +      - Cb\ :sub:`11`
>>> +      - Cr\ :sub:`11`
>>> +      - Cb\ :sub:`12`
>>> +      - Cr\ :sub:`12`
>>> +    * - start + 32:
>>> +      - Cb\ :sub:`13`
>>> +      - Cr\ :sub:`13`
>>> +      - Cb\ :sub:`14`
>>> +      - Cr\ :sub:`14`
>>> +
>>> +.. raw:: latex
>>>
>>>    Fully Planar YUV Formats
>>>    ========================
>>> diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
>>> index 40f56e044640..be23e319fb3a 100644
>>> --- a/drivers/media/v4l2-core/v4l2-common.c
>>> +++ b/drivers/media/v4l2-core/v4l2-common.c
>>> @@ -262,6 +262,8 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
>>>                   /* YUV planar formats */
>>>                   { .format = V4L2_PIX_FMT_NV12,    .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
>>>                   { .format = V4L2_PIX_FMT_NV21,    .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
>>> +               { .format = V4L2_PIX_FMT_NV15,    .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 5, 0, 0 }, .hdiv = 2, .vdiv = 2,
>>> +                 .block_w = { 4, 2, 0, 0 }, .block_h = { 1, 1, 0, 0 } },
>>>                   { .format = V4L2_PIX_FMT_NV16,    .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
>>>                   { .format = V4L2_PIX_FMT_NV61,    .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
>>>                   { .format = V4L2_PIX_FMT_NV24,    .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
>>> diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
>>> index 8e0a0ff62a70..1c80ad78ef00 100644
>>> --- a/drivers/media/v4l2-core/v4l2-ioctl.c
>>> +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
>>> @@ -1343,6 +1343,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
>>>           case V4L2_PIX_FMT_M420:         descr = "YUV 4:2:0 (M420)"; break;
>>>           case V4L2_PIX_FMT_NV12:         descr = "Y/UV 4:2:0"; break;
>>>           case V4L2_PIX_FMT_NV21:         descr = "Y/VU 4:2:0"; break;
>>> +       case V4L2_PIX_FMT_NV15:         descr = "10-bit Y/UV 4:2:0 (Packed)"; break;
>>>           case V4L2_PIX_FMT_NV16:         descr = "Y/UV 4:2:2"; break;
>>>           case V4L2_PIX_FMT_NV61:         descr = "Y/VU 4:2:2"; break;
>>>           case V4L2_PIX_FMT_NV24:         descr = "Y/UV 4:4:4"; break;
>>> diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
>>> index 1befd181a4cc..e9731286dc77 100644
>>> --- a/include/uapi/linux/videodev2.h
>>> +++ b/include/uapi/linux/videodev2.h
>>> @@ -621,6 +621,7 @@ struct v4l2_pix_format {
>>>    /* two planes -- one Y, one Cr + Cb interleaved  */
>>>    #define V4L2_PIX_FMT_NV12    v4l2_fourcc('N', 'V', '1', '2') /* 12  Y/CbCr 4:2:0  */
>>>    #define V4L2_PIX_FMT_NV21    v4l2_fourcc('N', 'V', '2', '1') /* 12  Y/CrCb 4:2:0  */
>>> +#define V4L2_PIX_FMT_NV15    v4l2_fourcc('N', 'V', '1', '5') /* 15  Y/CbCr 4:2:0 10-bit packed */
>>>    #define V4L2_PIX_FMT_NV16    v4l2_fourcc('N', 'V', '1', '6') /* 16  Y/CbCr 4:2:2  */
>>>    #define V4L2_PIX_FMT_NV61    v4l2_fourcc('N', 'V', '6', '1') /* 16  Y/CrCb 4:2:2  */
>>>    #define V4L2_PIX_FMT_NV24    v4l2_fourcc('N', 'V', '2', '4') /* 24  Y/CbCr 4:4:4  */
>>>
>>> --
>>> 2.25.1
>>
> 

-- 
Hsia-Jun(Randy) Li



More information about the Linux-rockchip mailing list