[PATCH v3 1/2] ARM: dts: rockchip: add gpio-ranges property to gpio nodes
Jonas Karlman
jonas at kwiboo.se
Thu Dec 28 08:30:33 PST 2023
Hi Johan,
On 2023-12-27 19:33, Johan Jonker wrote:
> Add a gpio-ranges property to Rockchip gpio nodes similar to
> rk356x/rk3588 to be independent from aliases and probe order.
>
> Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
> Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
> ---
>
> Changed V3:
> reword
> rebase to new Rockchip directory
> remove unknown properties
> ---
> arch/arm/boot/dts/rockchip/rk3036.dtsi | 3 +++
> arch/arm/boot/dts/rockchip/rk3066a.dtsi | 6 ++++++
> arch/arm/boot/dts/rockchip/rk3128.dtsi | 4 ++++
> arch/arm/boot/dts/rockchip/rk3188.dtsi | 4 ++++
> arch/arm/boot/dts/rockchip/rk322x.dtsi | 4 ++++
> arch/arm/boot/dts/rockchip/rk3288.dtsi | 9 +++++++++
> arch/arm/boot/dts/rockchip/rv1108.dtsi | 4 ++++
> arch/arm/boot/dts/rockchip/rv1126.dtsi | 5 +++++
> 8 files changed, 39 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi
> index 2b00109bea6a..6e5028b6dbfa 100644
> --- a/arch/arm/boot/dts/rockchip/rk3036.dtsi
> +++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi
> @@ -593,6 +593,7 @@ gpio0: gpio at 2007c000 {
> clocks = <&cru PCLK_GPIO0>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 0 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -606,6 +607,7 @@ gpio1: gpio at 20080000 {
> clocks = <&cru PCLK_GPIO1>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 32 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -619,6 +621,7 @@ gpio2: gpio at 20084000 {
> clocks = <&cru PCLK_GPIO2>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 64 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> diff --git a/arch/arm/boot/dts/rockchip/rk3066a.dtsi b/arch/arm/boot/dts/rockchip/rk3066a.dtsi
> index 30139f21de64..a4962b6b3f4c 100644
> --- a/arch/arm/boot/dts/rockchip/rk3066a.dtsi
> +++ b/arch/arm/boot/dts/rockchip/rk3066a.dtsi
> @@ -285,6 +285,7 @@ gpio0: gpio at 20034000 {
> clocks = <&cru PCLK_GPIO0>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 0 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -298,6 +299,7 @@ gpio1: gpio at 2003c000 {
> clocks = <&cru PCLK_GPIO1>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 32 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -311,6 +313,7 @@ gpio2: gpio at 2003e000 {
> clocks = <&cru PCLK_GPIO2>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 64 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -324,6 +327,7 @@ gpio3: gpio at 20080000 {
> clocks = <&cru PCLK_GPIO3>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 96 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -337,6 +341,7 @@ gpio4: gpio at 20084000 {
> clocks = <&cru PCLK_GPIO4>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 128 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -350,6 +355,7 @@ gpio6: gpio at 2000a000 {
> clocks = <&cru PCLK_GPIO6>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 192 32>;
It does not look like this matches what pins the pinctrl driver expose
for rk3066a. Something like <&pinctrl 0 160 16> would probably be more
correct.
> #gpio-cells = <2>;
>
> interrupt-controller;
> diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
> index e2264c40b924..d66fcf12032e 100644
> --- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
> +++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
> @@ -712,6 +712,7 @@ gpio0: gpio at 2007c000 {
> interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru PCLK_GPIO0>;
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 0 32>;
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> @@ -723,6 +724,7 @@ gpio1: gpio at 20080000 {
> interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru PCLK_GPIO1>;
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 32 32>;
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> @@ -734,6 +736,7 @@ gpio2: gpio at 20084000 {
> interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru PCLK_GPIO2>;
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 64 32>;
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> @@ -745,6 +748,7 @@ gpio3: gpio at 20088000 {
> interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru PCLK_GPIO3>;
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 96 32>;
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> diff --git a/arch/arm/boot/dts/rockchip/rk3188.dtsi b/arch/arm/boot/dts/rockchip/rk3188.dtsi
> index 44b54af0bbf9..6677e4a10e5d 100644
> --- a/arch/arm/boot/dts/rockchip/rk3188.dtsi
> +++ b/arch/arm/boot/dts/rockchip/rk3188.dtsi
> @@ -231,6 +231,7 @@ gpio0: gpio at 2000a000 {
> clocks = <&cru PCLK_GPIO0>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 0 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -244,6 +245,7 @@ gpio1: gpio at 2003c000 {
> clocks = <&cru PCLK_GPIO1>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 32 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -257,6 +259,7 @@ gpio2: gpio at 2003e000 {
> clocks = <&cru PCLK_GPIO2>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 64 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -270,6 +273,7 @@ gpio3: gpio at 20080000 {
> clocks = <&cru PCLK_GPIO3>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 96 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> diff --git a/arch/arm/boot/dts/rockchip/rk322x.dtsi b/arch/arm/boot/dts/rockchip/rk322x.dtsi
> index 831561fc1814..0d4f9957b99b 100644
> --- a/arch/arm/boot/dts/rockchip/rk322x.dtsi
> +++ b/arch/arm/boot/dts/rockchip/rk322x.dtsi
> @@ -959,6 +959,7 @@ gpio0: gpio at 11110000 {
> clocks = <&cru PCLK_GPIO0>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 0 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -972,6 +973,7 @@ gpio1: gpio at 11120000 {
> clocks = <&cru PCLK_GPIO1>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 32 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -985,6 +987,7 @@ gpio2: gpio at 11130000 {
> clocks = <&cru PCLK_GPIO2>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 64 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -998,6 +1001,7 @@ gpio3: gpio at 11140000 {
> clocks = <&cru PCLK_GPIO3>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 96 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> diff --git a/arch/arm/boot/dts/rockchip/rk3288.dtsi b/arch/arm/boot/dts/rockchip/rk3288.dtsi
> index ead343dc3df1..c5550aae4ed8 100644
> --- a/arch/arm/boot/dts/rockchip/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rockchip/rk3288.dtsi
> @@ -1461,6 +1461,7 @@ gpio0: gpio at ff750000 {
> clocks = <&cru PCLK_GPIO0>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 0 32>;
The pinctrl driver for rk3288 only expose 24 pins for the first bank,
correct range would probably be <&pinctrl 0 0 24> here,
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -1474,6 +1475,7 @@ gpio1: gpio at ff780000 {
> clocks = <&cru PCLK_GPIO1>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 32 32>;
and correct range would probably be <&pinctrl 0 24 32> here,
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -1487,6 +1489,7 @@ gpio2: gpio at ff790000 {
> clocks = <&cru PCLK_GPIO2>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 64 32>;
and <&pinctrl 0 56 32> here,
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -1500,6 +1503,7 @@ gpio3: gpio at ff7a0000 {
> clocks = <&cru PCLK_GPIO3>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 96 32>;
and <&pinctrl 0 88 32> here,
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -1513,6 +1517,7 @@ gpio4: gpio at ff7b0000 {
> clocks = <&cru PCLK_GPIO4>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 128 32>;
and <&pinctrl 0 120 32> here,
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -1526,6 +1531,7 @@ gpio5: gpio at ff7c0000 {
> clocks = <&cru PCLK_GPIO5>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 160 32>;
and <&pinctrl 0 152 32> here,
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -1539,6 +1545,7 @@ gpio6: gpio at ff7d0000 {
> clocks = <&cru PCLK_GPIO6>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 192 32>;
and <&pinctrl 0 184 32> here,
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -1552,6 +1559,7 @@ gpio7: gpio at ff7e0000 {
> clocks = <&cru PCLK_GPIO7>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 224 32>;
and <&pinctrl 0 216 32> here,
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -1565,6 +1573,7 @@ gpio8: gpio at ff7f0000 {
> clocks = <&cru PCLK_GPIO8>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 256 32>;
and bank num 8 only expose 16 pins, so <&pinctrl 0 248 16> here.
> #gpio-cells = <2>;
>
> interrupt-controller;
> diff --git a/arch/arm/boot/dts/rockchip/rv1108.dtsi b/arch/arm/boot/dts/rockchip/rv1108.dtsi
> index abf3006f0a84..d12b97ee7588 100644
> --- a/arch/arm/boot/dts/rockchip/rv1108.dtsi
> +++ b/arch/arm/boot/dts/rockchip/rv1108.dtsi
> @@ -602,6 +602,7 @@ gpio0: gpio at 20030000 {
> clocks = <&cru PCLK_GPIO0_PMU>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 0 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -615,6 +616,7 @@ gpio1: gpio at 10310000 {
> clocks = <&cru PCLK_GPIO1>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 32 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -628,6 +630,7 @@ gpio2: gpio at 10320000 {
> clocks = <&cru PCLK_GPIO2>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 64 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> @@ -641,6 +644,7 @@ gpio3: gpio at 10330000 {
> clocks = <&cru PCLK_GPIO3>;
>
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 96 32>;
> #gpio-cells = <2>;
>
> interrupt-controller;
> diff --git a/arch/arm/boot/dts/rockchip/rv1126.dtsi b/arch/arm/boot/dts/rockchip/rv1126.dtsi
> index bb603cae13df..71d091af6395 100644
> --- a/arch/arm/boot/dts/rockchip/rv1126.dtsi
> +++ b/arch/arm/boot/dts/rockchip/rv1126.dtsi
> @@ -569,6 +569,7 @@ gpio0: gpio at ff460000 {
> interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 0 32>;
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> @@ -580,6 +581,7 @@ gpio1: gpio at ff620000 {
> interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 32 32>;
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> @@ -591,6 +593,7 @@ gpio2: gpio at ff630000 {
> interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 64 32>;
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> @@ -602,6 +605,7 @@ gpio3: gpio at ff640000 {
> interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 96 32>;
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> @@ -613,6 +617,7 @@ gpio4: gpio at ff650000 {
> interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
> gpio-controller;
> + gpio-ranges = <&pinctrl 0 128 32>;
Bank num 4 only expose 2 pins, so should probably be <&pinctrl 0 128 2>.
Regards,
Jonas
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> --
> 2.39.2
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
More information about the Linux-rockchip
mailing list