[PATCH v2 1/3] ARM: dts: rockchip: Add psci for rk3036

Alex Bee knaerzche at gmail.com
Thu Dec 21 07:58:13 PST 2023


Hi Andy,

Am 21.12.23 um 02:07 schrieb Andy Yan:
> Hi Alex:
>
> On 12/20/23 19:16, Alex Bee wrote:
>> Hi Andy,
>> Am 18.12.23 um 11:55 schrieb Andy Yan:
>>> From: Andy Yan <andy.yan at rock-chips.com>
>>>
>>> The system will hang at bringup secondary CPUs
>>> without psci node.
>>>
>>> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
>>>
>>> ---
>>>
>>> (no changes since v1)
>>>
>>>   arch/arm/boot/dts/rockchip/rk3036.dtsi | 5 +++++
>>>   1 file changed, 5 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi 
>>> b/arch/arm/boot/dts/rockchip/rk3036.dtsi
>>> index 78686fc72ce6..5344803442a1 100644
>>> --- a/arch/arm/boot/dts/rockchip/rk3036.dtsi
>>> +++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi
>>> @@ -67,6 +67,11 @@ display-subsystem {
>>>           ports = <&vop_out>;
>>>       };
>>> +    psci {
>>> +        compatible = "arm,psci-1.0";
>>> +        method = "smc";
>>> +    };
>>> +
>> I don't think that's an good idea. 
>
> Why?
It's only what I've been told before: We shoudn't add properties which
depend on non-upstream software (if an upstream alternative exists). Also
I'm not sure what happens if somebody doesn't use downstream bootloader
and PSCI can't be found: Would the board still be able to boot?
>
>> You most likely need that because you have downstream bootloader 
>> installed on this board. PSCI implementation takes place in TEE-OS 
>> for Rockchips ARM SoCs. There is no support for RK3036 in upstream 
>> op-tee OS. It's pretty much the same for RK3128 and RK3288.
>> If you use upstream u-boot it should be good as-is.
>
> Unfortunately, upstream u-boot also cannot boot up on this board.
> At present, I haven't had time to debug what is going on.
>
> Another reason I want to use downstream u-boot it is: I try run
> this board with mainline just because i want to test some community
> patches about inno-hdmi driver, as you said "the inno-hdmi driver 
> currently gets a lot of attention"[0]
>
Thanks for helping testing this.

Alex

> With a downstream u-boot I can easy switch between upstream kernel and 
> downstream kernel(no need to replace other components)
> if I found some function is not work as expected.
>
>
> [0]https://patchwork.kernel.org/project/linux-rockchip/cover/20231219170100.188800-1-knaerzche@gmail.com/ 
>
>>
>> Alex
>>>       timer {
>>>           compatible = "arm,armv7-timer";
>>>           arm,cpu-registers-not-fw-configured;
>>
>>
>> _______________________________________________
>> Linux-rockchip mailing list
>> Linux-rockchip at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-rockchip



More information about the Linux-rockchip mailing list