[PATCH v1] dts: rockpro64: Remove usb regulator-always-on

[Shantur Rathore]

Hi Dragan,

On Sun, Dec 10, 2023 at 12:08 AM Dragan Simic <dsimic at manjaro.org> wrote:
>
> On 2023-12-10 01:03, Shantur Rathore wrote:
> > On Sat, Dec 9, 2023 at 11:43 PM Dragan Simic <dsimic at manjaro.org>
> > wrote:
> >> On 2023-12-10 00:35, Shantur Rathore wrote:
> >> > USB port regulators should be controlled by PHYs
> >> > so we remove always-on property and let PHYs manage the
> >> > regulator.
> >> >
> >> > Typec port has misconfugred phy-supply and now that we are
> >> > removing regulator-always-on, we need to fix the phy-supply
> >> > so the PHYs are able to turn power to type-c port.
> >> >
> >> > Signed-off-by: Shantur Rathore <i at shantur.com>
> >> > ---
> >> > + devicetree
> >> >
> >> > After this patch the ports were confirmed to power up and down
> >> > in u-boot when doing usb start and usb stop.
> >> > At boot the regulators were off, the devices connected weren't
> >> > powered up, on usb start the PHYs are able to power on the ports
> >> > and on usb stop they were powered down.
> >> >
> >> > At the boot, the ports were powered down which was again powered
> >> > up by Linux kernel when booting up.
> >> >
> >> >
> >> >  arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 4 +---
> >> >  1 file changed, 1 insertion(+), 3 deletions(-)
> >> >
> >> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> >> > b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> >> > index bca2b50e0a..bd2824aa48 100644
> >> > --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> >> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
> >> > @@ -192,7 +192,6 @@ vcc5v0_host: vcc5v0-host-regulator {
> >> >               pinctrl-names = "default";
> >> >               pinctrl-0 = <&vcc5v0_host_en>;
> >> >               regulator-name = "vcc5v0_host";
> >> > -             regulator-always-on;
> >> >               vin-supply = <&vcc5v0_usb>;
> >> >       };
> >> >
> >> > @@ -203,7 +202,6 @@ vcc5v0_typec: vcc5v0-typec-regulator {
> >> >               pinctrl-names = "default";
> >> >               pinctrl-0 = <&vcc5v0_typec_en>;
> >> >               regulator-name = "vcc5v0_typec";
> >> > -             regulator-always-on;
> >> >               vin-supply = <&vcc5v0_usb>;
> >> >       };
> >> >
> >> > @@ -863,7 +861,7 @@ u2phy0_otg: otg-port {
> >> >       };
> >> >
> >> >       u2phy0_host: host-port {
> >> > -             phy-supply = <&vcc5v0_host>;
> >> > +             phy-supply = <&vcc5v0_typec>;
> >> >               status = "okay";
> >> >       };
> >> >  };
> >>
> >> Quite frankly, something doesn't feel right there.  Would you mind,
> >> please, to place this patch on hold until next week or so, at which
> >> point I should have enough time to go through the RockPro64 schematic
> >> thoroughly once again, and test the patch in detail?
> >
> > Sure, no worries.
>
> Great, thanks.
>
> > Would you mind letting me know which part doesn't feel right to you?
>
> Sure, it was about the last change in the patch.

The TypeC port VBUS is VBUS_TYPEC on Page 20 of 33 marked for
VBUS_[1-4] in schematic here - [0]

[0] - https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf

Kind regards,
Shantur