[PATCH v2 3/4] media: rkisp1: Store IRQ lines

Laurent Pinchart laurent.pinchart at ideasonboard.com
Wed Dec 6 14:05:56 PST 2023


Hi Tomi,

Thank you for the patch.

On Wed, Dec 06, 2023 at 12:12:30PM +0200, Tomi Valkeinen wrote:
> Store the IRQ lines used by the driver for easy access. These are needed
> in future patches which fix IRQ race issues.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ideasonboard.com>
> ---
>  .../media/platform/rockchip/rkisp1/rkisp1-common.h    | 11 ++++++++++-
>  drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c   | 19 ++++++++++++++-----
>  2 files changed, 24 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
> index 960ab89c659b..ec28907d978e 100644
> --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
> +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
> @@ -62,6 +62,14 @@ struct regmap;
>  						 RKISP1_CIF_ISP_EXP_END |	\
>  						 RKISP1_CIF_ISP_HIST_MEASURE_RDY)
>  
> +/* IRQ lines */
> +enum rkisp1_irq_line {
> +	RKISP1_IRQ_ISP = 0,
> +	RKISP1_IRQ_MI,
> +	RKISP1_IRQ_MIPI,
> +	RKISP1_NUM_IRQS,
> +};
> +
>  /* enum for the resizer pads */
>  enum rkisp1_rsz_pad {
>  	RKISP1_RSZ_PAD_SINK,
> @@ -437,7 +445,6 @@ struct rkisp1_debug {
>   * struct rkisp1_device - ISP platform device
>   *
>   * @base_addr:	   base register address
> - * @irq:	   the irq number
>   * @dev:	   a pointer to the struct device
>   * @clk_size:	   number of clocks
>   * @clks:	   array of clocks
> @@ -457,6 +464,7 @@ struct rkisp1_debug {
>   * @stream_lock:   serializes {start/stop}_streaming callbacks between the capture devices.
>   * @debug:	   debug params to be exposed on debugfs
>   * @info:	   version-specific ISP information
> + * @irqs:          IRQ line numbers
>   */
>  struct rkisp1_device {
>  	void __iomem *base_addr;
> @@ -479,6 +487,7 @@ struct rkisp1_device {
>  	struct mutex stream_lock; /* serialize {start/stop}_streaming cb between capture devices */
>  	struct rkisp1_debug debug;
>  	const struct rkisp1_info *info;
> +	int irqs[RKISP1_NUM_IRQS];
>  };
>  
>  /*
> diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
> index 030eb8c79546..492ff5e6770d 100644
> --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
> +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
> @@ -115,6 +115,7 @@
>  struct rkisp1_isr_data {
>  	const char *name;
>  	irqreturn_t (*isr)(int irq, void *ctx);
> +	u32 line_mask;
>  };
>  
>  /* ----------------------------------------------------------------------------
> @@ -473,9 +474,9 @@ static const char * const px30_isp_clks[] = {
>  };
>  
>  static const struct rkisp1_isr_data px30_isp_isrs[] = {
> -	{ "isp", rkisp1_isp_isr },
> -	{ "mi", rkisp1_capture_isr },
> -	{ "mipi", rkisp1_csi_isr },
> +	{ "isp", rkisp1_isp_isr, BIT(RKISP1_IRQ_ISP) },
> +	{ "mi", rkisp1_capture_isr, BIT(RKISP1_IRQ_MI) },
> +	{ "mipi", rkisp1_csi_isr, BIT(RKISP1_IRQ_MIPI) },
>  };
>  
>  static const struct rkisp1_info px30_isp_info = {
> @@ -496,7 +497,7 @@ static const char * const rk3399_isp_clks[] = {
>  };
>  
>  static const struct rkisp1_isr_data rk3399_isp_isrs[] = {
> -	{ NULL, rkisp1_isr },
> +	{ NULL, rkisp1_isr, BIT(RKISP1_IRQ_ISP) | BIT(RKISP1_IRQ_MI) | BIT(RKISP1_IRQ_MIPI) },
>  };
>  
>  static const struct rkisp1_info rk3399_isp_info = {
> @@ -517,7 +518,7 @@ static const char * const imx8mp_isp_clks[] = {
>  };
>  
>  static const struct rkisp1_isr_data imx8mp_isp_isrs[] = {
> -	{ NULL, rkisp1_isr },
> +	{ NULL, rkisp1_isr, BIT(RKISP1_IRQ_ISP) | BIT(RKISP1_IRQ_MI) | BIT(RKISP1_IRQ_MIPI) },

The i.MX8MP has no CSI-2 RX in the ISP, you can drop RKISP1_IRQ_MIPI.

I think we can merge this series before the i.MX8MP support, could you
base v3 on top of the master branch of the linux-media stage tree ?

>  };
>  
>  static const struct rkisp1_info imx8mp_isp_info = {
> @@ -574,6 +575,9 @@ static int rkisp1_probe(struct platform_device *pdev)
>  	if (IS_ERR(rkisp1->base_addr))
>  		return PTR_ERR(rkisp1->base_addr);
>  
> +	for (unsigned int il = 0; il < RKISP1_NUM_IRQS; ++il)

I would use ARRAY_SIZE(rkisp1->irqs) instead of RKISP1_NUM_IRQS here.

> +		rkisp1->irqs[il] = -1;
> +
>  	for (i = 0; i < info->isr_size; i++) {
>  		irq = info->isrs[i].name
>  		    ? platform_get_irq_byname(pdev, info->isrs[i].name)
> @@ -581,6 +585,11 @@ static int rkisp1_probe(struct platform_device *pdev)
>  		if (irq < 0)
>  			return irq;
>  
> +		for (unsigned int il = 0; il < RKISP1_NUM_IRQS; ++il) {

Same here.

> +			if (info->isrs[i].line_mask & BIT(il))
> +				rkisp1->irqs[il] = irq;
> +		}
> +
>  		ret = devm_request_irq(dev, irq, info->isrs[i].isr, 0,
>  				       dev_driver_string(dev), dev);
>  		if (ret) {

-- 
Regards,

Laurent Pinchart



More information about the Linux-rockchip mailing list