[PATCH V2 06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel

neil.armstrong at linaro.org neil.armstrong at linaro.org
Mon Dec 4 23:57:48 PST 2023


On 04/12/2023 19:57, Chris Morgan wrote:
> From: Chris Morgan <macromorgan at hotmail.com>
> 
> Add support for the Powkiddy X55 panel as used on the Powkiddy X55
> handheld gaming console. This panel uses a Himax HX8394 display
> controller and requires a vendor provided init sequence. The display
> resolution is 720x1280 and is 67mm by 121mm as measured with calipers.
> 
> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx8394.c | 137 +++++++++++++++++++++
>   1 file changed, 137 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> index b68ea09f4725..ff0dc08b9829 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> @@ -38,6 +38,7 @@
>   #define HX8394_CMD_SETMIPI	  0xba
>   #define HX8394_CMD_SETOTP	  0xbb
>   #define HX8394_CMD_SETREGBANK	  0xbd
> +#define HX8394_CMD_UNKNOWN5	  0xbf
>   #define HX8394_CMD_UNKNOWN1	  0xc0
>   #define HX8394_CMD_SETDGCLUT	  0xc1
>   #define HX8394_CMD_SETID	  0xc3
> @@ -52,6 +53,7 @@
>   #define HX8394_CMD_SETGIP1	  0xd5
>   #define HX8394_CMD_SETGIP2	  0xd6
>   #define HX8394_CMD_SETGPO	  0xd6
> +#define HX8394_CMD_UNKNOWN4	  0xd8
>   #define HX8394_CMD_SETSCALING	  0xdd
>   #define HX8394_CMD_SETIDLE	  0xdf
>   #define HX8394_CMD_SETGAMMA	  0xe0
> @@ -203,6 +205,140 @@ static const struct hx8394_panel_desc hsd060bhw4_desc = {
>   	.init_sequence = hsd060bhw4_init_sequence,
>   };
>   
> +static int powkiddy_x55_init_sequence(struct hx8394 *ctx)
> +{
> +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> +
> +	/* 5.19.8 SETEXTC: Set extension command (B9h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETEXTC,
> +			       0xff, 0x83, 0x94);
> +
> +	/* 5.19.9 SETMIPI: Set MIPI control (BAh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETMIPI,
> +			       0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0);
> +
> +	/* 5.19.2 SETPOWER: Set power (B1h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
> +			       0x48, 0x12, 0x72, 0x09, 0x32, 0x54, 0x71, 0x71, 0x57, 0x47);
> +
> +	/* 5.19.3 SETDISP: Set display related register (B2h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETDISP,
> +			       0x00, 0x80, 0x64, 0x2c, 0x16, 0x2f);
> +
> +	/* 5.19.4 SETCYC: Set display waveform cycles (B4h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETCYC,
> +			       0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c, 0x86, 0x75,
> +			       0x00, 0x3f, 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c,
> +			       0x86);
> +
> +	/* 5.19.5 SETVCOM: Set VCOM voltage (B6h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETVCOM,
> +			       0x6e, 0x6e);
> +
> +	/* 5.19.19 SETGIP0: Set GIP Option0 (D3h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP0,
> +			       0x00, 0x00, 0x07, 0x07, 0x40, 0x07, 0x0c, 0x00, 0x08, 0x10,
> +			       0x08, 0x00, 0x08, 0x54, 0x15, 0x0a, 0x05, 0x0a, 0x02, 0x15,
> +			       0x06, 0x05, 0x06, 0x47, 0x44, 0x0a, 0x0a, 0x4b, 0x10, 0x07,
> +			       0x07, 0x0c, 0x40);
> +
> +	/* 5.19.20 Set GIP Option1 (D5h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP1,
> +			       0x1c, 0x1c, 0x1d, 0x1d, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
> +			       0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x24, 0x25, 0x18, 0x18,
> +			       0x26, 0x27, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> +			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x20, 0x21,
> +			       0x18, 0x18, 0x18, 0x18);
> +
> +	/* 5.19.21 Set GIP Option2 (D6h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP2,
> +			       0x1c, 0x1c, 0x1d, 0x1d, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02,
> +			       0x01, 0x00, 0x0b, 0x0a, 0x09, 0x08, 0x21, 0x20, 0x18, 0x18,
> +			       0x27, 0x26, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> +			       0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x25, 0x24,
> +			       0x18, 0x18, 0x18, 0x18);
> +
> +	/* 5.19.25 SETGAMMA: Set gamma curve related setting (E0h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGAMMA,
> +			       0x00, 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56,
> +			       0x65, 0x66, 0x6e, 0x82, 0x88, 0x8b, 0x9a, 0x9d, 0x98, 0xa8,
> +			       0xb9, 0x5d, 0x5c, 0x61, 0x66, 0x6a, 0x6f, 0x7f, 0x7f, 0x00,
> +			       0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56, 0x65,
> +			       0x65, 0x6e, 0x81, 0x87, 0x8b, 0x98, 0x9d, 0x99, 0xa8, 0xba,
> +			       0x5d, 0x5d, 0x62, 0x67, 0x6b, 0x72, 0x7f, 0x7f);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN1,
> +			       0x1f, 0x31);
> +
> +	/* 5.19.17 SETPANEL (CCh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPANEL,
> +			       0x0b);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN3,
> +			       0x02);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x02);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN4,
> +			       0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
> +			       0xff, 0xff);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x00);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x01);
> +
> +	/* 5.19.2 SETPOWER: Set power (B1h) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
> +			       0x00);
> +
> +	/* 5.19.11 Set register bank (BDh) */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> +			       0x00);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN5,
> +			       0x40, 0x81, 0x50, 0x00, 0x1a, 0xfc, 0x01);
> +
> +	/* Unknown command, not listed in the HX8394-F datasheet */
> +	mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN2,
> +			       0xed);
> +
> +	return 0;
> +}
> +
> +static const struct drm_display_mode powkiddy_x55_mode = {
> +	.hdisplay	= 720,
> +	.hsync_start	= 720 + 44,
> +	.hsync_end	= 720 + 44 + 20,
> +	.htotal		= 720 + 44 + 20 + 20,
> +	.vdisplay	= 1280,
> +	.vsync_start	= 1280 + 12,
> +	.vsync_end	= 1280 + 12 + 10,
> +	.vtotal		= 1280 + 12 + 10 + 10,
> +	.clock		= 63290,
> +	.flags		= DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> +	.width_mm	= 67,
> +	.height_mm	= 121,
> +};
> +
> +static const struct hx8394_panel_desc powkiddy_x55_desc = {
> +	.mode = &powkiddy_x55_mode,
> +	.lanes = 4,
> +	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> +		      MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET,
> +	.format = MIPI_DSI_FMT_RGB888,
> +	.init_sequence = powkiddy_x55_init_sequence,
> +};
> +
>   static int hx8394_enable(struct drm_panel *panel)
>   {
>   	struct hx8394 *ctx = panel_to_hx8394(panel);
> @@ -419,6 +555,7 @@ static void hx8394_remove(struct mipi_dsi_device *dsi)
>   
>   static const struct of_device_id hx8394_of_match[] = {
>   	{ .compatible = "hannstar,hsd060bhw4", .data = &hsd060bhw4_desc },
> +	{ .compatible = "powkiddy,x55-panel", .data = &powkiddy_x55_desc },
>   	{ /* sentinel */ }
>   };
>   MODULE_DEVICE_TABLE(of, hx8394_of_match);

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>



More information about the Linux-rockchip mailing list