[PATCH v2 2/5] ARM: dts: rockchip: Add power-controller for RK3128

[Heiko Stübner]

Hi Alex,

Am Sonntag, 3. Dezember 2023, 17:05:47 CET schrieb Alex Bee:
> Am 02.12.23 um 18:46 schrieb Heiko Stübner:
> > Am Samstag, 2. Dezember 2023, 17:36:15 CET schrieb Alex Bee:
> >> Am 02.12.23 um 16:51 schrieb Heiko Stübner:
> >>> Am Samstag, 2. Dezember 2023, 13:51:41 CET schrieb Alex Bee:
> >>>> Add power controller and qos nodes for RK3128 in order to use
> >>>> them as powerdomains.
> >>> does the power-domain controller work with the incomplete set of
> >>> pm-domains too?
> >> Yes, it does - the missing domains can request idle only and can't be
> >> powered on/off - if no one requests idle they are just up all the time.
> >>
> >>> What I have in mind is
> >>> - adding the power-controller node with the existing set of power-domains
> >>> - the gpu pm-domain is in there
> >>> - adding the gpu parts
> >> My main concern about adding them later was the change of the ABI after
> >> they've been exposed in the SoC DT. If that's not an issue - sure: I can
> >> add them in a separate series.
> > An ABI change would be _changing_ the domain-ids in the rk3128-power.h
> > I think :-) .
> Well, an addition is still a change.
> > Right now the existing domain ids in the header are already exposed to the
> > world, so someone could already use them, but not the new ones.
> 
> I'm fully aware that nothing would ever hard fail anywhere if the new 
> domain ids get added later.
> 
> Nevertheless we start using here an ABI which is known to be incomplete. 
> For no reason, as the patches (which I am now asked to remove from this 
> series) for completion are already there (here).
> 
> Anyway, if you prefer it this way: I'm pleased to do so.

I was more thinking of accelerating the gpu-part of the series, as that
really is just waiting for the power-domain node that already has driver
support and domain-ids present.

It looks like you're feeling more strongly about that though, so I'll
definitly not pressure you ;-) .

But I guess the split into IDs and driver change should still be
done, especially as the dt-binding-header likely will want an Ack
from the DT maintainers.

And the power-domain change will go through the new pmdomain
subsystem.


Heiko


> >>> And a second series with
> >>> - patch1 from here
> >>> - a dts patch adding the additional pm-domains to rk3128.dtsi
> >>> - I guess patch1 also should be split into a patch adding the binding-ids
> >>>     and a separate patch for the code addition.
> >> Yeah, I noticed this also :)
> >>
> >> Regards,
> >>
> >> Alex
> >>
> >>>
> >>> Heiko
> >>>
> >>>> Signed-off-by: Alex Bee <knaerzche at gmail.com>
> >>>> ---
> >>>>    arch/arm/boot/dts/rockchip/rk3128.dtsi | 101 +++++++++++++++++++++++++
> >>>>    1 file changed, 101 insertions(+)
> >>>>
> >>>> diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
> >>>> index 4e8b38604ecd..b72905db04f7 100644
> >>>> --- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
> >>>> +++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
> >>>> @@ -8,6 +8,7 @@
> >>>>    #include <dt-bindings/interrupt-controller/arm-gic.h>
> >>>>    #include <dt-bindings/interrupt-controller/irq.h>
> >>>>    #include <dt-bindings/pinctrl/rockchip.h>
> >>>> +#include <dt-bindings/power/rk3128-power.h>
> >>>>    
> >>>>    / {
> >>>>    	compatible = "rockchip,rk3128";
> >>>> @@ -133,6 +134,106 @@ smp-sram at 0 {
> >>>>    	pmu: syscon at 100a0000 {
> >>>>    		compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
> >>>>    		reg = <0x100a0000 0x1000>;
> >>>> +
> >>>> +		power: power-controller {
> >>>> +			compatible = "rockchip,rk3128-power-controller";
> >>>> +			#power-domain-cells = <1>;
> >>>> +			#address-cells = <1>;
> >>>> +			#size-cells = <0>;
> >>>> +
> >>>> +			power-domain at RK3128_PD_VIO {
> >>>> +				reg = <RK3128_PD_VIO>;
> >>>> +				clocks = <&cru ACLK_CIF>,
> >>>> +					 <&cru HCLK_CIF>,
> >>>> +					 <&cru DCLK_EBC>,
> >>>> +					 <&cru HCLK_EBC>,
> >>>> +					 <&cru ACLK_IEP>,
> >>>> +					 <&cru HCLK_IEP>,
> >>>> +					 <&cru ACLK_LCDC0>,
> >>>> +					 <&cru HCLK_LCDC0>,
> >>>> +					 <&cru PCLK_MIPI>,
> >>>> +					 <&cru ACLK_RGA>,
> >>>> +					 <&cru HCLK_RGA>,
> >>>> +					 <&cru ACLK_VIO0>,
> >>>> +					 <&cru ACLK_VIO1>,
> >>>> +					 <&cru HCLK_VIO>,
> >>>> +					 <&cru HCLK_VIO_H2P>,
> >>>> +					 <&cru DCLK_VOP>,
> >>>> +					 <&cru SCLK_VOP>;
> >>>> +				pm_qos = <&qos_ebc>,
> >>>> +					 <&qos_iep>,
> >>>> +					 <&qos_lcdc>,
> >>>> +					 <&qos_rga>,
> >>>> +					 <&qos_vip>;
> >>>> +				#power-domain-cells = <0>;
> >>>> +			};
> >>>> +
> >>>> +			power-domain at RK3128_PD_VIDEO {
> >>>> +				reg = <RK3128_PD_VIDEO>;
> >>>> +				clocks = <&cru ACLK_VDPU>,
> >>>> +					 <&cru HCLK_VDPU>,
> >>>> +					 <&cru ACLK_VEPU>,
> >>>> +					 <&cru HCLK_VEPU>,
> >>>> +					 <&cru SCLK_HEVC_CORE>;
> >>>> +				pm_qos = <&qos_vpu>;
> >>>> +				#power-domain-cells = <0>;
> >>>> +			};
> >>>> +
> >>>> +			power-domain at RK3128_PD_GPU {
> >>>> +				reg = <RK3128_PD_GPU>;
> >>>> +				clocks = <&cru ACLK_GPU>;
> >>>> +				pm_qos = <&qos_gpu>;
> >>>> +				#power-domain-cells = <0>;
> >>>> +			};
> >>>> +
> >>>> +			power-domain at RK3128_PD_CRYPTO {
> >>>> +				reg = <RK3128_PD_CRYPTO>;
> >>>> +				clocks = <&cru HCLK_CRYPTO>,
> >>>> +					 <&cru SCLK_CRYPTO>;
> >>>> +				pm_qos = <&qos_crypto>;
> >>>> +				#power-domain-cells = <0>;
> >>>> +			};
> >>>> +		};
> >>>> +	};
> >>>> +
> >>>> +	qos_crypto: qos at 10128080 {
> >>>> +		compatible = "rockchip,rk3128-qos", "syscon";
> >>>> +		reg = <0x10128080 0x20>;
> >>>> +	};
> >>>> +
> >>>> +	qos_gpu: qos at 1012d000 {
> >>>> +		compatible = "rockchip,rk3128-qos", "syscon";
> >>>> +		reg = <0x1012d000 0x20>;
> >>>> +	};
> >>>> +
> >>>> +	qos_vpu: qos at 1012e000 {
> >>>> +		compatible = "rockchip,rk3128-qos", "syscon";
> >>>> +		reg = <0x1012e000 0x20>;
> >>>> +	};
> >>>> +
> >>>> +	qos_rga: qos at 1012f000 {
> >>>> +		compatible = "rockchip,rk3128-qos", "syscon";
> >>>> +		reg = <0x1012f000 0x20>;
> >>>> +	};
> >>>> +
> >>>> +	qos_ebc: qos at 1012f080 {
> >>>> +		compatible = "rockchip,rk3128-qos", "syscon";
> >>>> +		reg = <0x1012f080 0x20>;
> >>>> +	};
> >>>> +
> >>>> +	qos_iep: qos at 1012f100 {
> >>>> +		compatible = "rockchip,rk3128-qos", "syscon";
> >>>> +		reg = <0x1012f100 0x20>;
> >>>> +	};
> >>>> +
> >>>> +	qos_lcdc: qos at 1012f180 {
> >>>> +		compatible = "rockchip,rk3128-qos", "syscon";
> >>>> +		reg = <0x1012f180 0x20>;
> >>>> +	};
> >>>> +
> >>>> +	qos_vip: qos at 1012f200 {
> >>>> +		compatible = "rockchip,rk3128-qos", "syscon";
> >>>> +		reg = <0x1012f200 0x20>;
> >>>>    	};
> >>>>    
> >>>>    	gic: interrupt-controller at 10139000 {
> >>>>
> >>>
> >>>
> >
> >
> >
>