[PATCH -next v2 18/25] spi: microchip-core: Use helper function devm_clk_get_enabled()

Li Zetao lizetao1 at huawei.com
Wed Aug 23 06:39:31 PDT 2023


Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enables (and possibly
prepares) the clocks for the whole lifetime of the device. Moreover, it is
no longer necessary to unprepare and disable the clocks explicitly.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron at huawei.com>
Signed-off-by: Li Zetao <lizetao1 at huawei.com>
---
v1 -> v2: None

 drivers/spi/spi-microchip-core.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/spi/spi-microchip-core.c b/drivers/spi/spi-microchip-core.c
index b451cd4860ec..becdcdc9e6d1 100644
--- a/drivers/spi/spi-microchip-core.c
+++ b/drivers/spi/spi-microchip-core.c
@@ -539,22 +539,16 @@ static int mchp_corespi_probe(struct platform_device *pdev)
 		return dev_err_probe(&pdev->dev, ret,
 				     "could not request irq\n");
 
-	spi->clk = devm_clk_get(&pdev->dev, NULL);
+	spi->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(spi->clk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(spi->clk),
 				     "could not get clk\n");
 
-	ret = clk_prepare_enable(spi->clk);
-	if (ret)
-		return dev_err_probe(&pdev->dev, ret,
-				     "failed to enable clock\n");
-
 	mchp_corespi_init(master, spi);
 
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (ret) {
 		mchp_corespi_disable(spi);
-		clk_disable_unprepare(spi->clk);
 		return dev_err_probe(&pdev->dev, ret,
 				     "unable to register master for SPI controller\n");
 	}
@@ -570,7 +564,6 @@ static void mchp_corespi_remove(struct platform_device *pdev)
 	struct mchp_corespi *spi = spi_master_get_devdata(master);
 
 	mchp_corespi_disable_ints(spi);
-	clk_disable_unprepare(spi->clk);
 	mchp_corespi_disable(spi);
 }
 
-- 
2.34.1




More information about the Linux-rockchip mailing list