[PATCH v2] usb: typec: tcpm: fix multiple times discover svids error

[Greg KH]

On Fri, Mar 17, 2023 at 01:27:13PM +0200, Heikki Krogerus wrote:
> On Thu, Mar 16, 2023 at 04:11:49PM +0800, Frank Wang wrote:
> > PD3.0 Spec 6.4.4.3.2 say that only Responder supports 12 or more SVIDs,
> > the Discover SVIDs Command Shall be executed multiple times until a
> > Discover SVIDs VDO is returned ending either with a SVID value of
> > 0x0000 in the last part of the last VDO or with a VDO containing two
> > SVIDs with values of 0x0000.
> > 
> > In the current implementation, if the last VDO does not find that the
> > Discover SVIDs Command would be executed multiple times even if the
> > Responder SVIDs are less than 12, and we found some odd dockers just
> > meet this case. So fix it.
> > 
> > Signed-off-by: Frank Wang <frank.wang at rock-chips.com>
> > ---
> >  drivers/usb/typec/tcpm/tcpm.c | 16 +++++++++++++++-
> >  1 file changed, 15 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> > index 66de02a56f512..a3ae2c79f3540 100644
> > --- a/drivers/usb/typec/tcpm/tcpm.c
> > +++ b/drivers/usb/typec/tcpm/tcpm.c
> > @@ -1515,7 +1515,21 @@ static bool svdm_consume_svids(struct tcpm_port *port, const u32 *p, int cnt)
> >  		pmdata->svids[pmdata->nsvids++] = svid;
> >  		tcpm_log(port, "SVID %d: 0x%x", pmdata->nsvids, svid);
> >  	}
> > -	return true;
> > +
> > +	/*
> > +	 * PD3.0 Spec 6.4.4.3.2: The SVIDs are returned 2 per VDO (see Table
> > +	 * 6-43), and can be returned maximum 6 VDOs per response (see Figure
> > +	 * 6-19). If the Respondersupports 12 or more SVID then the Discover
> > +	 * SVIDs Command Shall be executed multiple times until a Discover
> > +	 * SVIDs VDO is returned ending either with a SVID value of 0x0000 in
> > +	 * the last part of the last VDO or with a VDO containing two SVIDs
> > +	 * with values of 0x0000.
> > +	 *
> > +	 * However, some odd dockers support SVIDs less than 12 but without
> > +	 * 0x0000 in the last VDO, so we need to break the Discover SVIDs
> > +	 * request and return false here.
> > +	 */
> > +	return cnt == 7;
> >  abort:
> >  	tcpm_log(port, "SVID_DISCOVERY_MAX(%d) too low!", SVID_DISCOVERY_MAX);
> >  	return false;
> 
> This is OK by men, but let's wait for Guenter.

What ever happened to this patch?

thanks,

greg k-h