[PATCH 1/2] dt-bindings: hwmon: pwm-fan: Convert to DT schema

[Rob Herring]

On Mon, Apr 03, 2023 at 01:50:51PM +0300, Cristian Ciocaltea wrote:
> Convert the PWM fan bindings to DT schema format.
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
> ---
>  .../devicetree/bindings/hwmon/pwm-fan.txt     |  68 +----------
>  .../devicetree/bindings/hwmon/pwm-fan.yaml    | 109 ++++++++++++++++++
>  2 files changed, 110 insertions(+), 67 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> index 4509e688623a..48886f0ce415 100644
> --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> @@ -1,67 +1 @@
> -Bindings for a fan connected to the PWM lines
> -
> -Required properties:
> -- compatible	: "pwm-fan"
> -- pwms		: the PWM that is used to control the PWM fan
> -- cooling-levels      : PWM duty cycle values in a range from 0 to 255
> -			which correspond to thermal cooling states
> -
> -Optional properties:
> -- fan-supply		: phandle to the regulator that provides power to the fan
> -- interrupts		: This contains an interrupt specifier for each fan
> -			  tachometer output connected to an interrupt source.
> -			  The output signal must generate a defined number of
> -			  interrupts per fan revolution, which require that
> -			  it must be self resetting edge interrupts. See
> -			  interrupt-controller/interrupts.txt for the format.
> -- pulses-per-revolution : define the number of pulses per fan revolution for
> -			  each tachometer input as an integer (default is 2
> -			  interrupts per revolution). The value must be
> -			  greater than zero.
> -
> -Example:
> -	fan0: pwm-fan {
> -		compatible = "pwm-fan";
> -		#cooling-cells = <2>;
> -		pwms = <&pwm 0 10000 0>;
> -		cooling-levels = <0 102 170 230>;
> -	};
> -
> -	thermal-zones {
> -		cpu_thermal: cpu-thermal {
> -			     thermal-sensors = <&tmu 0>;
> -			     polling-delay-passive = <0>;
> -			     polling-delay = <0>;
> -			     trips {
> -					cpu_alert1: cpu-alert1 {
> -						    temperature = <100000>; /* millicelsius */
> -						    hysteresis = <2000>; /* millicelsius */
> -						    type = "passive";
> -					};
> -			     };
> -			     cooling-maps {
> -					map0 {
> -						    trip = <&cpu_alert1>;
> -						    cooling-device = <&fan0 0 1>;
> -					};
> -			     };
> -		};
> -
> -Example 2:
> -	fan0: pwm-fan {
> -		compatible = "pwm-fan";
> -		pwms = <&pwm 0 40000 0>;
> -		fan-supply = <&reg_fan>;
> -		interrupt-parent = <&gpio5>;
> -		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> -		pulses-per-revolution = <2>;
> -	};
> -
> -Example 3:
> -	fan0: pwm-fan {
> -		compatible = "pwm-fan";
> -		pwms = <&pwm1 0 25000 0>;
> -		interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>,
> -			<&gpio2 5 IRQ_TYPE_EDGE_FALLING>;
> -		pulses-per-revolution = <2>, <1>;
> -	};
> +This file has moved to pwm-fan.yaml.
> diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
> new file mode 100644
> index 000000000000..448b48ec5d73
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
> @@ -0,0 +1,109 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/pwm-fan.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Fan connected to PWM lines
> +
> +maintainers:
> +  - Jean Delvare <jdelvare at suse.com>
> +  - Guenter Roeck <linux at roeck-us.net>
> +
> +properties:
> +  compatible:
> +    const: pwm-fan
> +
> +  cooling-levels:
> +    description:
> +      PWM duty cycle values in a range from 0 to 255 which correspond to

Don't put constraints in plain text:

items:
  maximum: 255

> +      thermal cooling states.
> +    $ref: /schemas/types.yaml#/definitions/uint32-array

Unfortunately, looks like we've wound up with same property with 2 
differing types. A problem for another day...

> +
> +  fan-supply:
> +    description: Phandle to the regulator that provides power to the fan.
> +
> +  interrupts:
> +    description:
> +      This contains an interrupt specifier for each fan tachometer output
> +      connected to an interrupt source. The output signal must generate a
> +      defined number of interrupts per fan revolution, which require that
> +      it must be self resetting edge interrupts.

How many entries? I'm not sure how more than 1 makes sense.

> +
> +  pulses-per-revolution:
> +    description:
> +      Define the number of pulses per fan revolution for each tachometer
> +      input as an integer (default is 2 interrupts per revolution).

default: 2

> +      The value must be greater than zero.

minimum: 1

maximum: ??? I assume there's some practical limit here much less than 
2^32.

> +    $ref: /schemas/types.yaml#/definitions/uint32-array

Isn't this a scalar? 
> +
> +  pwms:
> +    description: The PWM that is used to control the fan.
> +    maxItems: 1
> +
> +  pwm-names: true
> +
> +  "#cooling-cells":
> +    description: The PWM fan can be referenced as a cooling-device.

Not that useful. What would be is what's in the 2 cells.

> +    const: 2
> +
> +required:
> +  - compatible
> +  - pwms
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pwm-fan {
> +      compatible = "pwm-fan";
> +      cooling-levels = <0 102 170 230>;
> +      pwms = <&pwm 0 10000 0>;
> +      #cooling-cells = <2>;
> +    };
> +
> +    thermal-zones {
> +      cpu_thermal: cpu-thermal {
> +        thermal-sensors = <&tmu 0>;
> +        polling-delay-passive = <0>;
> +        polling-delay = <0>;
> +
> +        trips {
> +          cpu_alert1: cpu-alert1 {
> +            temperature = <100000>; /* millicelsius */
> +            hysteresis = <2000>; /* millicelsius */
> +            type = "passive";
> +          };
> +        };
> +
> +        cooling-maps {
> +          map0 {
> +            trip = <&cpu_alert1>;
> +            cooling-device = <&fan0 0 1>;
> +          };
> +        };
> +      };
> +    };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    pwm-fan {
> +      compatible = "pwm-fan";
> +      pwms = <&pwm 0 40000 0>;
> +      fan-supply = <&reg_fan>;
> +      interrupt-parent = <&gpio5>;
> +      interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> +      pulses-per-revolution = <2>;
> +    };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    pwm-fan {
> +      compatible = "pwm-fan";
> +      pwms = <&pwm1 0 25000 0>;
> +      interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>,
> +                            <&gpio2 5 IRQ_TYPE_EDGE_FALLING>;
> +      pulses-per-revolution = <2>, <1>;
> +    };
> -- 
> 2.40.0
>