[PATCH v3] arm64: dts: rockchip: fix quartz64-a bluetooth configuration

Lev Popov leo at nabam.net
Sun Sep 25 22:54:33 PDT 2022


For "Quartz64 Model A" add missing RTS line to the UART interface used by
bluetooth and swap bluetooth host-wakeup and device-wakeup gpio pins to
match the boards physical layout. This changes are necessary to make
bluetooth provided by the wireless module work.

Fixes: b33a22a1e7c4248608e533fc4fa524258b3fae84 (arm64: dts: rockchip: add basic dts for Pine64 Quartz64-A)

Signed-off-by: Lev Popov <leo at nabam.net>
---
 arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index a05460b92415..91908081c5ed 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -740,7 +740,7 @@ &uart0 {
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
 	status = "okay";
 	uart-has-rtscts;
 
@@ -748,8 +748,8 @@ bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		clocks = <&rk817 1>;
 		clock-names = "lpo";
-		device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
 		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
-- 
2.37.3




More information about the Linux-rockchip mailing list