[PATCH 13/15] iio: health: max30100: do not use internal iio_dev lock
Miquel Raynal
miquel.raynal at bootlin.com
Tue Sep 20 08:10:33 PDT 2022
Hi Nuno,
noname.nuno at gmail.com wrote on Tue, 20 Sep 2022 16:56:01 +0200:
> On Tue, 2022-09-20 at 15:53 +0200, Miquel Raynal wrote:
> > Hi Nuno,
> >
> > Nuno.Sa at analog.com wrote on Tue, 20 Sep 2022 13:15:32 +0000:
> >
> > > > -----Original Message-----
> > > > From: Miquel Raynal <miquel.raynal at bootlin.com>
> > > > Sent: Tuesday, September 20, 2022 2:56 PM
> > > > To: Sa, Nuno <Nuno.Sa at analog.com>
> > > > Cc: linux-arm-kernel at lists.infradead.org;
> > > > linux-rockchip at lists.infradead.org;
> > > > linux-amlogic at lists.infradead.org; linux-imx at nxp.com; linux-
> > > > iio at vger.kernel.org; Chunyan Zhang <zhang.lyra at gmail.com>;
> > > > Hennerich,
> > > > Michael <Michael.Hennerich at analog.com>; Martin Blumenstingl
> > > > <martin.blumenstingl at googlemail.com>; Sascha Hauer
> > > > <s.hauer at pengutronix.de>; Cixi Geng <cixi.geng1 at unisoc.com>;
> > > > Kevin
> > > > Hilman <khilman at baylibre.com>; Vladimir Zapolskiy <vz at mleia.com>;
> > > > Pengutronix Kernel Team <kernel at pengutronix.de>; Alexandru
> > > > Ardelean
> > > > <aardelean at deviqon.com>; Fabio Estevam <festevam at gmail.com>;
> > > > Andriy
> > > > Tryshnivskyy <andriy.tryshnivskyy at opensynergy.com>; Haibo Chen
> > > > <haibo.chen at nxp.com>; Shawn Guo <shawnguo at kernel.org>; Hans de
> > > > Goede <hdegoede at redhat.com>; Jerome Brunet
> > > > <jbrunet at baylibre.com>;
> > > > Heiko Stuebner <heiko at sntech.de>; Florian Boor
> > > > <florian.boor at kernelconcepts.de>; Regus, Ciprian
> > > > <Ciprian.Regus at analog.com>; Lars-Peter Clausen <lars at metafoo.de>;
> > > > Andy
> > > > Shevchenko <andy.shevchenko at gmail.com>; Jonathan Cameron
> > > > <jic23 at kernel.org>; Neil Armstrong <narmstrong at baylibre.com>;
> > > > Baolin
> > > > Wang <baolin.wang at linux.alibaba.com>; Jyoti Bhayana
> > > > <jbhayana at google.com>; Chen-Yu Tsai <wens at csie.org>; Orson Zhai
> > > > <orsonzhai at gmail.com>
> > > > Subject: Re: [PATCH 13/15] iio: health: max30100: do not use
> > > > internal iio_dev
> > > > lock
> > > >
> > > > [External]
> > > >
> > > > Hi Nuno,
> > > >
> > > > Nuno.Sa at analog.com wrote on Tue, 20 Sep 2022 12:44:08 +0000:
> > > >
> > > > > > -----Original Message-----
> > > > > > From: Miquel Raynal <miquel.raynal at bootlin.com>
> > > > > > Sent: Tuesday, September 20, 2022 2:23 PM
> > > > > > To: Sa, Nuno <Nuno.Sa at analog.com>
> > > > > > Cc: linux-arm-kernel at lists.infradead.org; linux-
> > > > rockchip at lists.infradead.org;
> > > > > > linux-amlogic at lists.infradead.org; linux-imx at nxp.com; linux-
> > > > > > iio at vger.kernel.org; Chunyan Zhang <zhang.lyra at gmail.com>;
> > > > Hennerich,
> > > > > > Michael <Michael.Hennerich at analog.com>; Martin Blumenstingl
> > > > > > <martin.blumenstingl at googlemail.com>; Sascha Hauer
> > > > > > <s.hauer at pengutronix.de>; Cixi Geng <cixi.geng1 at unisoc.com>;
> > > > > > Kevin
> > > > > > Hilman <khilman at baylibre.com>; Vladimir Zapolskiy
> > > > > > <vz at mleia.com>;
> > > > > > Pengutronix Kernel Team <kernel at pengutronix.de>; Alexandru
> > > > Ardelean
> > > > > > <aardelean at deviqon.com>; Fabio Estevam <festevam at gmail.com>;
> > > > Andriy
> > > > > > Tryshnivskyy <andriy.tryshnivskyy at opensynergy.com>; Haibo
> > > > > > Chen
> > > > > > <haibo.chen at nxp.com>; Shawn Guo <shawnguo at kernel.org>; Hans
> > > > > > de
> > > > > > Goede <hdegoede at redhat.com>; Jerome Brunet
> > > > <jbrunet at baylibre.com>;
> > > > > > Heiko Stuebner <heiko at sntech.de>; Florian Boor
> > > > > > <florian.boor at kernelconcepts.de>; Regus, Ciprian
> > > > > > <Ciprian.Regus at analog.com>; Lars-Peter Clausen
> > > > > > <lars at metafoo.de>;
> > > > Andy
> > > > > > Shevchenko <andy.shevchenko at gmail.com>; Jonathan Cameron
> > > > > > <jic23 at kernel.org>; Neil Armstrong <narmstrong at baylibre.com>;
> > > > > > Baolin
> > > > > > Wang <baolin.wang at linux.alibaba.com>; Jyoti Bhayana
> > > > > > <jbhayana at google.com>; Chen-Yu Tsai <wens at csie.org>; Orson
> > > > > > Zhai
> > > > > > <orsonzhai at gmail.com>
> > > > > > Subject: Re: [PATCH 13/15] iio: health: max30100: do not use
> > > > > > internal
> > > > iio_dev
> > > > > > lock
> > > > > >
> > > > > > [External]
> > > > > >
> > > > > > Hi Nuno,
> > > > > >
> > > > >
> > > > > Hi Miquel,
> > > > >
> > > > > Thanks for reviewing...
> > > > >
> > > > > > nuno.sa at analog.com wrote on Tue, 20 Sep 2022 13:28:19 +0200:
> > > > > >
> > > > > > > The pattern used in this device does not quite fit in the
> > > > > > > iio_device_claim_direct_mode() typical usage. In this case,
> > > > > > > iio_buffer_enabled() was being used not to prevent the raw
> > > > > > > access but
> > > > to
> > > > > > > allow it. Hence to get rid of the 'mlock' we need to:
> > > > > > >
> > > > > > > 1. Use iio_device_claim_direct_mode() to check if direct
> > > > > > > mode can be
> > > > > > > claimed and if we can return -EINVAL (as the original
> > > > > > > code);
> > > > > > >
> > > > > > > 2. Make sure that buffering is not disabled while doing a
> > > > > > > raw read. For
> > > > > > > that, we can make use of the local lock that already
> > > > > > > exists.
> > > > > > >
> > > > > > > While at it, fixed a minor coding style complain...
> > > > > > >
> > > > > > > Signed-off-by: Nuno Sá <nuno.sa at analog.com>
> > > > > > > ---
> > > > > > > drivers/iio/health/max30100.c | 24 +++++++++++++++++------
> > > > > > > -
> > > > > > > 1 file changed, 17 insertions(+), 7 deletions(-)
> > > > > > >
> > > > > > > diff --git a/drivers/iio/health/max30100.c
> > > > b/drivers/iio/health/max30100.c
> > > > > > > index ad5717965223..aa494cad5df0 100644
> > > > > > > --- a/drivers/iio/health/max30100.c
> > > > > > > +++ b/drivers/iio/health/max30100.c
> > > > > > > @@ -185,8 +185,19 @@ static int
> > > > > > > max30100_buffer_postenable(struct
> > > > > > iio_dev *indio_dev)
> > > > > > > static int max30100_buffer_predisable(struct iio_dev
> > > > > > > *indio_dev)
> > > > > > > {
> > > > > > > struct max30100_data *data = iio_priv(indio_dev);
> > > > > > > + int ret;
> > > > > > > +
> > > > > > > + /*
> > > > > > > + * As stated in the comment in the read_raw()
> > > > > > > function, temperature
> > > > > > > + * can only be acquired if the engine is running.
> > > > > > > As such the mutex
> > > > > > > + * is used to make sure we do not power down while
> > > > > > > doing a
> > > > > > temperature
> > > > > > > + * reading.
> > > > > > > + */
> > > > > > > + mutex_lock(&data->lock);
> > > > > > > + ret = max30100_set_powermode(data, false);
> > > > > > > + mutex_unlock(&data->lock);
> > > > > > >
> > > > > > > - return max30100_set_powermode(data, false);
> > > > > > > + return ret;
> > > > > > > }
> > > > > > >
> > > > > > > static const struct iio_buffer_setup_ops
> > > > > > > max30100_buffer_setup_ops
> > > > = {
> > > > > > > @@ -387,18 +398,17 @@ static int max30100_read_raw(struct
> > > > > > > iio_dev
> > > > > > *indio_dev,
> > > > > > > * Temperature reading can only be acquired
> > > > > > > while engine
> > > > > > > * is running
> > > > > > > */
> > > > > > > - mutex_lock(&indio_dev->mlock);
> > > > > > > -
> > > > > > > - if (!iio_buffer_enabled(indio_dev))
> > > > > > > + if
> > > > > > > (!iio_device_claim_direct_mode(indio_dev)) {
> > > > > >
> > > > > > I wonder if this line change here is really needed. I agree
> > > > > > the whole
> > > > > > construction looks like what iio_device_claim_direct_mode()
> > > > > > does but in
> > > > > > practice I don't see the point of acquiring any lock here if
> > > > > > we just
> > > > > > release it no matter what happens right after.
> > > > > >
> > > > >
> > > > > I can see that this is odd (at the very least) but AFAIK, this
> > > > > is the only way
> > > > > to safely infer if buffering is enabled or not.
> > > > > iio_buffer_enabled() has no
> > > > > protection against someone concurrently enabling/disabling the
> > > > > buffer.
> > > >
> > > > Yes, but this is only relevant if you want to infer that the
> > > > "buffers
> > > > are enabled" and be sure that it cannot be otherwise during the
> > > > next
> > > > lines until you release the lock. Acquiring a lock, doing the if
> > > > and
> > > > then unconditionally releasing the lock, IMHO, does not make any
> > > > sense
> > > > (but I'm not a locking guru) because when you enter the else
> > > > clause,
> > > > you are not protected anyway, so in both cases all this is
> > > > completely
> > > > racy.
> > > >
> > >
> > > Ahh crap, yes you are right... It is still racy since we can still
> > > try to read
> > > the temperature with the device powered off. I'm not really sure
> > > how to
> > > address this. One way could be to just use an internal control
> > > variable
> > > to reflect the device power state (set/clear on the buffer
> > > callbacks) and
> > > only use the local lock (completely ditching the call to
> > > iio_device_claim_direct_mode())...
> >
> > I tend to prefer this option than the one below.
> >
> > I guess your implementation already prevents buffer_predisable() to
> > run
> > thanks to the local lock being held during the operation. Maybe we
> > should just verify that buffers are enabled from within the local
> > lock
> > being held instead of just acquiring it for the get_temp() measure.
> > It
> > would probably solve the situation here.
> > >
> Not sure if I understood... You mean something like:
>
> mutex_lock(&data->lock);
> if (!iio_buffer_enabled(indio_dev)) {
> ret = -EINVAL;
> } else {
> ret = max30100_get_temp(data, val);
> if (!ret)
> ret = IIO_VAL_INT;
>
> }
> mutex_unlock(&data->lock);
>
> If so, I think this is still racy since we release the lock after the
> predisable which means we could still detect the buffers as enabled (in
> the above block) and try to get_temp on a powered down device.
True.
>
> Since we pretty much only care about the power state of the device (and
> we are using the buffering state to infer that AFAIU), I was thinking
> in something like:
>
>
> mutex_lock(&data->lock);
> if (!data->powered) {
> ret = -EINVAL;
> } else {
> ret = max30100_get_temp(data, val);
> if (!ret)
> ret = IIO_VAL_INT;
>
> }
> mutex_unlock(&data->lock);
LGTM.
>
> Then, in the predisable, something like I have but setting the flag to
> false and the opposite on the postenable... Naturally we could also
> just read the registers (and I actually tend to prefer it) instead of a
> new flag but I guess the flag is enough in this case.
>
> - Nuno Sá
> >
Thanks,
Miquèl
More information about the Linux-rockchip
mailing list