[PATCH] arm64: dts: rockchip: Enable video output on Station M2

[Furkan Kardame]

Hello

On Tuesday 13 September 2022 15:10:25 (+03:00), Heiko Stuebner wrote:

 > Hi,
 >
 > Am Montag, 27. Juni 2022, 22:22:08 CEST schrieb Furkan Kardame:
 > > Add the device tree nodes to enable video output on the Station M2.
 >
 > what is this "Station M2". You're changing the rk3566-roc-pc device,
 > which I think is "just" an SBC?

Station M2 is the same SBC with a case on.  Station M2 Link: 
https://www.firefly.store/goods.php?id=142
Rk3566-roc-pc is the barebone sbc without the casing.  : 
https://en.t-firefly.com/product/industry/rocrk3566pc.html

 >
 > Does the rk3566-roc-pc in general have a hdmi port as well?
Yes it have hdmi port.
 >
 >
 > Heiko
 >
 > > Enable the GPU and HDMI nodes and fix the GPU regulator range.
 > >
 > > Signed-off-by: Furkan Kardame <f.kardame at manjaro.org>
 > > ---
 > > .../arm64/boot/dts/rockchip/rk3566-roc-pc.dts | 52 +++++++++++++++++++
 > > 1 file changed, 52 insertions(+)
 > >
 > > diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts 
b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
 > > index 57759b66d..dba648c2f 100644
 > > --- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
 > > +++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
 > > @@ -4,6 +4,7 @@
 > >
 > > #include <dt-bindings/gpio/gpio.h>
 > > #include <dt-bindings/pinctrl/rockchip.h>
 > > +#include <dt-bindings/soc/rockchip,vop2.h>
 > > #include "rk3566.dtsi"
 > >
 > > / {
 > > @@ -27,6 +28,17 @@ gmac1_clkin: external-gmac1-clock {
 > > #clock-cells = <0>;
 > > };
 > >
 > > + hdmi-con {
 > > + compatible = "hdmi-connector";
 > > + type = "a";
 > > +
 > > + port {
 > > + hdmi_con_in: endpoint {
 > > + remote-endpoint = <&hdmi_out_con>;
 > > + };
 > > + };
 > > + };
 > > +
 > > leds {
 > > compatible = "gpio-leds";
 > >
 > > @@ -149,6 +161,29 @@ &gmac1m0_clkinout
 > > status = "okay";
 > > };
 > >
 > > +&gpu {
 > > + mali-supply = <&vdd_gpu>;
 > > + status = "okay";
 > > +};
 > > +
 > > +&hdmi {
 > > + avdd-0v9-supply = <&vdda0v9_image>;
 > > + avdd-1v8-supply = <&vcca1v8_image>;
 > > + status = "okay";
 > > +};
 > > +
 > > +&hdmi_in {
 > > + hdmi_in_vp0: endpoint {
 > > + remote-endpoint = <&vp0_out_hdmi>;
 > > + };
 > > +};
 > > +
 > > +&hdmi_out {
 > > + hdmi_out_con: endpoint {
 > > + remote-endpoint = <&hdmi_con_in>;
 > > + };
 > > +};
 > > +
 > > &i2c0 {
 > > status = "okay";
 > >
 > > @@ -577,3 +612,20 @@ &usb_host0_ehci {
 > > &usb_host0_ohci {
 > > status = "okay";
 > > };
 > > +
 > > +&vop {
 > > + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
 > > + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
 > > + status = "okay";
 > > +};
 > > +
 > > +&vop_mmu {
 > > + status = "okay";
 > > +};
 > > +
 > > +&vp0 {
 > > + vp0_out_hdmi: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
 > > + reg = <ROCKCHIP_VOP2_EP_HDMI0>;
 > > + remote-endpoint = <&hdmi_in_vp0>;
 > > + };
 > > +};
 > >
 >
 >
 >
 >
 >

-- 
--
With best regards
Furkan Kardame