[PATCH v3 0/3] rockchip-dsi for rk3568

Chris Morgan macroalpha82 at gmail.com
Mon Sep 12 13:56:04 PDT 2022


From: Chris Morgan <macromorgan at hotmail.com>

This series adds support for the dsi and dphy controllers on the
Rockchip RK3568.

Tested on an Anbernic RG503, Anbernic RG353P, and Odroid Go Advance.

Changes since V2:
 - Removed dsi controller patches, as those have been merged upstream.
 - Removed notes about rolling back clock drivers. If I set the parent
   clock of the VOP port I'm using to VPLL and set the clock rate of
   PLL_VPLL to 500MHz this series works correctly for my panels without
   rolling anything back (per Heiko this is the correct way).
 - Added additional details about refactoring DPHY driver to add
   2.5GHz for rk356x. All other devices still have a max speed of 1GHz.
 - Notified Heiko that the BIT(5) for both PLL_POST_DIV_ENABLE and
   PLL_POST_DIV_ENABLE_MASK is deliberate, because of how the
   phy_update_bits() works.

Changes since RFCv1:
 - Identified cause of image shift (clock changes).
 - Noted that driver works now.
 - Added devicetree nodes for rk356x.dtsi.

Chris Morgan (3):
  dt-bindings: phy-rockchip-inno-dsidphy: add compatible  for rk3568
  phy/rockchip: inno-dsidphy: Add support for rk3568
  arm64: dts: rockchip: Add DSI and DSI-DPHY nodes to rk356x

 .../bindings/phy/rockchip,px30-dsi-dphy.yaml  |   1 +
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      |  72 +++++++
 .../phy/rockchip/phy-rockchip-inno-dsidphy.c  | 204 ++++++++++++++----
 3 files changed, 231 insertions(+), 46 deletions(-)

-- 
2.25.1




More information about the Linux-rockchip mailing list