[PATCHv3 08/14] dt-bindings: mfd: add rk806 binding

[Krzysztof Kozlowski]

On 09/09/2022 19:55, Sebastian Reichel wrote:
> Add DT binding document for Rockchip's RK806 PMIC.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
> ---

Thank you for your patch. There is something to discuss/improve.


> +  vcc11-supply:
> +    description:
> +      The input supply for pldo-reg1, pldo-reg2 and pldo-reg3.
> +
> +  vcc12-supply:
> +    description:
> +      The input supply for pldo-reg4 and pldo-reg5.
> +
> +  vcc13-supply:
> +    description:
> +      The input supply for nldo-reg1, nldo-reg2 and nldo-reg3.
> +
> +  vcc14-supply:
> +    description:
> +      The input supply for nldo-reg4 and nldo-reg5.
> +
> +  vcca-supply:
> +    description:
> +      The input supply for pldo-reg6.
> +
> +  regulators:
> +    type: object
> +    patternProperties:
> +      "^(dcdc-reg([1-9]|10)|pldo-reg[1-6]|nldo-reg[1-5])$":
> +        type: object
> +        $ref: /schemas/regulator/regulator.yaml#
> +    unevaluatedProperties: false

Sorry, for not spotting it earlier but the indentation here looks wrong.
On "patternProperties" indentation you need additionalProperties: false,
because only the patterns are allowed.

On "$ref: ....." level of indentation, you need unevaluatedProperties:
false, because you allow only properties previously evaluated (evaluated
by regulator.yaml).

Best regards,
Krzysztof